527392
155
Zoom out
Zoom in
Previous page
1/180
Next page
MIDI
155
Right Display
The “Sync” parameters allow you to specify whether or not the BK-9
should send MIDI real-time messages when you start rhythm or
song playback. This allows you to synchronize external instruments
or (software) sequencers with your BK-9.
Rhythm Start/Stop Tx
If you activate this option, the BK-9 sends start or stop messages
when you start (or stop) rhythm playback.
Parameter Setting
Rhythm Start/Stop Tx O, On
Rhythm Clock Tx
If you activate this option the rhythm playback sends MIDI Clock
messages.
Parameter Setting
Rhythm Clock Tx O, On
SMF Start/Stop Tx
Similar to “Rhythm Start/Stop Tx” but for songs.
Parameter Setting
SMF Start/Stop Tx O, On
SMF Clock Tx
Similar to “Rhythm Clock Tx” but for songs.
Parameter Setting
SMF Clock Tx O, On
SMF Position Tx
If you switch this parameter on, the song playback sends Song
Position Pointer (SPP) messages that indicate the current playback
position.
Parameter Setting
SMF Position Tx O, On
Sync Rx
This parameter is used to specify whether rhythm and song
playback should be synchronized by an external MIDI device.
Parameter Setting
Sync Rx O, On
Mode
Parameter Setting
Mode Internal, Auto, MIDI, Remote
• Internal: Song or rhythm playback uses BK-9 internal tempo.
Auto: A good setting for remote control of song or rhythm
playback (using a PK-series dynamic MIDI pedal board, for
example). If the BK-9 receives a MIDI Start message (FA), it
waits for Clock messages that specify the tempo. If those Clock
messages are not received, the BK-9 starts playback using its
internal tempo. If, however, Clock messages (F8) follow after the
Start message, the BK-9 uses the external tempo.
• MIDI: Song or rhythm playback can be started or stopped with
MIDI real-time messages (Start, Stop, Clock) received from an
external clock source.
• Remote: Song or rhythm playback waits for a start message
to start playback at its own tempo. When it receives a stop
message, playback stops. External clock messages are ignored.
Basic
The following parameters are located on the display page that can
be selected using [MENU] button “MIDI” “Edit System “Basic”.
Right Display
The Basic channel is used to receive and transmit Program Change
and Bank Select messages for selecting Performances, as well as for
the reception and transmission of other kinds of messages that are
not directly related to a specic MIDI channel.
NOTE
If you select another channel, messages intended for the Basic
parameters might also cause other parameters to change when
you don’t want them to.
The following parameters are available here:
Tx
Switches the transmission of MIDI messages on the Basic channel
on or o.
Parameter Setting
Tx O, On
Tx Channel
The channel used to transmit MIDI messages.
Parameter Setting
Tx Channel 1~16
Performance PC Tx
This parameter is used to enable or disable the transmission of
program change and bank select messages related to Performance
selection.
155


Need help? Post your question in this forum.

Forumrules
1

Forum

roland-bk-9

Reset search

  • New owner BK 9. How to add speaker and what kind , wats ?? totally ignorant. Submitted on 7-1-2023 at 03:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-9 in the language / languages: English as an attachment in your email.

The manual is 59,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-9

Roland BK-9 Additional guide - English - 12 pages

Roland BK-9 Additional guide - German - 9 pages

Roland BK-9 User Manual - German - 160 pages

Roland BK-9 User Manual - Dutch - 160 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info