Manual Roland BK-9 (page 150 of 180) (English)

527392

150

Zoom out

Zoom in

1/180

Menu options

150

Parameter Setting Explanation

High Ratio 1:1.0~1:INF

Use this parameter to specify how

strongly the level should be reduced

when the band’s level exceeds the

“Threshold” level. “1:2.0”, for example,

means that level values above the

“Threshold” level are halved. “1:INF” is

useful if you set “Threshold” to “0 dB”

or thereabout. This produces a limiter

eect, which means that no signal level

will ever exceed the “Threshold” value.

This may help you protect the speakers

of the PA system etc.

High Level –24~+24 dB

This parameter allows you to establish

the desired mix among the three

compressor bands. Choose a negative

value to decrease the level, or a positive

one to increase it. Choose “0” for a band

whose level is OK as is.

Mid Attack 0~100 ms See “High Attack”.

Mid Release 50~5000 ms See “High Release”.

Mid Threshold –36~0 dB See “High Threshold”.

Mid Ratio 1:1.0~1:INF See “High Ratio”.

Mid Level –24~+24 dB See “High Level”.

Low Attack 0~100 ms See “High Attack”.

Low Release 50~5000 ms See “High Release”.

Low Threshold –36~0 dB See “High Threshold”.

Low Ratio 1:1.0~1:INF See “High Ratio”.

Low Level –24~+24 dB See “High Level”.

Split High 2000~12000 Hz

These two parameters specify the

frequency where two bands are

separated. The compressor has three

bands, and so there are two crossover

frequencies you can set: “High” between

the “Mid” and “High” ranges; and “Low”

between the “Mid” and “Low” ranges.

Split Low 80~800 Hz

Write the “User” Compressor

This function allows you to save the settings you made on the “SMF/

Rhythm Compressor” or “Tone Parts Compressor” page.

1. Press the [WRITE] button.

Right Display

2. Rotate the dial to select “YES”, then push it to save the

current settings.

The display shows a conrmation message.

If you don’t want to dene the current settings, select “NO”

The BK-9 then returns to the “Compressor” page.

NOTE

There is only one “User” memory for your own settings. By

saving new settings, you therefore overwrite the previous ones.

NOTE

When you switch on the BK-9, it automatically loads the “User”

settings.

SMF/Rhythm and Tone Parts Equalizer

To edit the SMF/Rhythm Equalizer parameters, use [MENU] button

 “Mastering Tools”  “SMF/Rhythm Equalizer”.

To edit the Tone Parts Equalizer parameters, use [MENU] button 

“Mastering Tools”  “Tone Parts Equalizer”.

Right Display

1. Select a keyboard part if you chose “Tone Parts Equalizer”.

Select an SMF song or a rhythm and start playback if you

chose “Tone Parts Equalizer”.

2. Set the “Switch” parameter to “On” to activate the

equalizer.

3. Rotate the dial to select the “Preset” parameter, then push

it.

4. Rotate the dial to select one of the available presets.

The available presets are:

New owner BK 9. How to add speaker and what kind , wats ?? totally ignorant. Submitted on 7-1-2023 at 03:00
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-9 in the language / languages: English as an attachment in your email.

The manual is 59,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-9

Roland BK-9 Additional guide - English - 12 pages

Roland BK-9 Additional guide - German - 9 pages

Roland BK-9 User Manual - German - 160 pages

Roland BK-9 User Manual - Dutch - 160 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roland BK-9 Manual

Product: