527390
3
Zoom out
Zoom in
Previous page
1/10
Next page
Addendum v1.06
Backing Module BK-7m
r
3
‰[MENU] button ‰ “Performance Edit” ‰ “Arranger
Settings”.
Tempo Ch Acc/Rit, CPT, Fill Rit
The “Tempo Ch Acc/Rit” parameter allows you to
speed up or slow down the rhythm tempo by the
amount you set here. To use these functions, you
must assign them to an optional footswitch.
There are three Ritardando functions: one for all
rhythm patterns, one for Ending patterns and one for
fill-ins (see “Fill Ritardando” above). They all use the
“Tempo Change” settings on the following page.
TempoCh Acc/Rit:
Allows you to set the degree
(ratio) by which the tempo changes when the “Acc”
or “Rit” function is triggered. Example: if the tempo is
currently
q
= 100, the value “20%” means that the
tempo drops to
q
= 80 or rises to
q
= 120.
TempoCh CPT:
Use this parameter to specify how
long a ritardando/accelerando should take. In most
cases, 480 CPT (i.e. one measure) is probably the most
musical choice.
TempoCh Fill Rit:
This parameter allows you to spec-
ify to what extent fill-in playback should be slowed
down when the “Fill Ritardando” function is on.
Using the Ritardando/Accelerando functions
For general applications proceed as follows:
(a) Assign the “Arr. Rit Tempo” or “Arr. Acc Tempo”
function to an optional footswitch. See “‘Pedal’
settings” on p. 3 and “New ‘Pedal Controller FC-7’
functions” on p. 4 of this addendum.
(b) Press the [START/STOP] button to start playback.
(c) Press the previous assigned pedal switch or an
optional FC-7 (sold separately). By assigning two
controls, you can increase (Accelerando) and
decrease (Ritardando) the tempo.
For Ritardandos that apply to Ending patterns pro-
ceed as follows:
(a) Press the [START/STOP] button to start playback.
(b) Press the [ENDING] button twice in succession
(“double-click”).
‰[MENU] button ‰ “Global” ‰ “Utility”.
The “UP1 EQ/MFX Link” parameter was added. Please
insert after “Perform Next Song”:
‰The “Auto Power Off” parameter (page 64 in the owner’s
manual) is now called “Auto Off” and has additional
setting options.
‰[MENU] button ‰ “Global” ‰ “Pedal”.
The following pedal parameters were added: FillIn Half
Bar, Fill Ritardando, Arr. Rit Tempo, Arr. Acc Tempo,
Lower Hold, Part Ex. UP2/1, Mfx Switch, Rotary S/F.
Below please find the complete table (it replaces the one
on page 65 in the owner’s manual).
New ‘Tempo Change’ parameters
Parameter Setting
TempoCh Acc/Rit
5%~92%
TempoCh CPT 0~3825
TempoCh Fill Rit 5%~92%
‘Utility’ parameters
Parameter Setting Explanation
UP1 EQ/MFX
Link
Off, On If you select “on”, the
BK-7m selects suitable
MFX and equalizer set-
tings for each Tone
you assign to the
Upper1 part.
Parameter Setting Explanation
Auto Off
Off, 10, 30,
240 min
This parameter allows
you to cause the
BK-7m to switch itself
off after 10, 30 or 240
minutes if you are not
using it. “Off” means
that the BK-7m
remains on until you
press the [POWER]
switch again.
The default setting is
“240”.
‘Pedal’ settings
Function Explanation
Start/Stop
Starts and stops Music Style or song
playback. Same function as the
[START/STOP] button.
Intro
Ending
Variation1
Variation2
Variation3
Variation4
Bass Inversion
Same functions as the [INTRO],
[ENDING], [VARIATION1],
[VARIATION2], [VARIATION3],
[VARIATION4], [BASS INV] buttons.
See “Using Music Styles” on p. 30.
Arranger Hold Allows you to switch the Arranger
Hold function on and off.
FillIn Hal Bar
Allows you to switch the “Fillin Half
Bar” function on and off.
Fill Ritardando
Allows you to switch the “Fill Ritar-
dando” function on and off.
Arr. Rit Tempo
Allows you to activate the Arranger’s
“Tempo Ch Rit” function.
BK-7m Addend.fm Page 3 Wednesday, March 28, 2012 4:47 PM
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-7M BACKING MODULE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-7M BACKING MODULE in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-7M BACKING MODULE

Roland BK-7M BACKING MODULE User Manual - English - 128 pages

Roland BK-7M BACKING MODULE Additional guide - German - 10 pages

Roland BK-7M BACKING MODULE User Manual - German - 124 pages

Roland BK-7M BACKING MODULE User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info