527390

Roland BK-7M BACKING MODULE Manual

39
Zoom out
Zoom in
Previous page
1/128
Next page
Using Split mode
Backing Module BK-7m
r
39
When you start playback, you will notice that active
parts are indicated by moving bar graphs that simu-
late level meters. The bar graphs of muted parts do
not move.
7.
If there is no need to save your settings,
press and hold the [EXIT] button to return to
the main page.
Using Split mode
In Split mode, the BK-7m transmits note messages
below the split point to the MBS, LWR and NTA (Note-
to-Arranger) parts. The note numbers above the split
point, however, are transmitted to the UP2 and UP1
parts.
This only works if your external MIDI controller trans-
mits all note messages on the same MIDI channel and if
the BK-7m is set to receive on one MIDI channel only
(see “‘Wizard Connection’ MIDI channel settings” on
p. 26). Therefore, we suggest activating Split mode only
if you use a digital piano or a single-zone MIDI master
keyboard.
NOTE
In most cases, the default setting for the split point is note
number 60 (C4). When you select a “DIGITAL PIANO” option
(see p. 22), however, the split point is set to note number 54
(F#3). You can also change the split point to a different note
(see “Split Point” on p. 59).
1.
Press the [SPLIT] button (its indicator
lights).
The BK-7m is now in Split mode: note numbers below
the split point (see “Split” on p. 50) are used to trans-
pose Music Styles playback in real-time and to play
the MBS and/or LWR parts (if they are active). Note
numbers above the split point can be used to play
melodies using the UP1 and/or UP2 part.
In Split mode, the “Type” parameter (see p. 60) is
automatically set to “Intelligent”.
NOTE
See page 27 for how to select the real-time parts you want
to use.
NOTE
You can activate a “Hold” function for the LWR part. See
“Lower Hold” on p. 59.
2.
Press the [SPLIT] button again.
The BK-7m leaves Split mode and the [SPLIT] indica-
tor goes dark and chord recognition (see “Type” on
p. 60) is set to “Pianist”. This setting works as follows:
the Arranger decodes every chord you play – no mat-
ter where you play it. Causing the Arranger to play
another chord requires that you play at least a triad
(i.e. the three notes that make up a major or minor
chord). You can play more than three chord notes but
remember that two notes won’t cause the Arranger
to change the key.
SPLIT
LW2 MBS
+ Music Style control
UP1, UP2
MIDI OUT
MIDI IN
BK-7m_UK.book Page 39 Tuesday, January 4, 2011 9:25 AM
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-7M BACKING MODULE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-7M BACKING MODULE in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-7M BACKING MODULE

Roland BK-7M BACKING MODULE Additional guide - English - 10 pages

Roland BK-7M BACKING MODULE Additional guide - German - 10 pages

Roland BK-7M BACKING MODULE User Manual - German - 124 pages

Roland BK-7M BACKING MODULE User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info