527390
25
Zoom out
Zoom in
Previous page
1/128
Next page
Details about the ‘Wizard Connection’ categories
Backing Module BK-7m
r
25
allowing you to control which notes you play on your
guitar should be recognized by the BK-7m’s Arranger
(see p. 65).
The “Wizard Connection” function sets the BK-7m’s
chord recognition to “Guitarist” (irrespective of
whether or not the [SPLIT] button lights) and acti-
vates the “Split” and “Arranger Type” filters of the
“Performance Hold” function to ensure that those
settings don’t change when you recall another Per-
formance memory or One Touch setting.
NOTE
Roland recommends leaving the [SPLIT] button off while
you are using this setting.
‘DIGITAL ORGAN’ category
Select “CHURCH ORGAN1” if your organ transmits on
MIDI channels 12, 13 and 14.
•The only step will be “Wizard Settings will be
saved” (see step (7) on page 22).
Select “CHURCH ORGAN2” if your organ transmits on
MIDI channels 1, 2 and 3.
•The only step will be “Wizard Settings will be
saved” (see step (7) on page 22).
The notes played on Manual II (Swell) and Manual I
(Great) as well as the bass pedal board control the
BK-7m’s real-time parts UP1, UP2, LWR and MBS. The
chords played on Manual I (Great) are also used by
the Arranger’s NTA section (for chord recognition).
The “Wizard Connection” function sets the BK-7m’s
chord recognition to “Intelligent” (irrespective of
whether or not the [SPLIT] button lights) and acti-
vates the “Split” and “Arranger Type” filters of the
“Performance Hold” function to ensure that those
settings don’t change when you recall another Per-
formance memory or One Touch setting.
Select “ELECTRONIC ORGAN” if your organ transmits
on other MIDI channels than the ones selected for
“CHURCH ORGAN1” and “CHURCH ORGAN2”. In this
mode, the BK-7m’s wizard detects the MIDI channel
numbers to be assigned to UP1, UP2, LWR and MBS. The
chords you play on the lower manual (LWR) are also
used by the BK-7m’s Arranger.
Here, there are four steps:
•“Play a note on Upper section” ‰ Press any key on
the upper manual to specify the MIDI channel for the
UP1 and UP2 parts.
•“Play a note on Lower section” ‰ Press any key on
the lower manual to specify the MIDI channel for the
LWR part.
•“Play a note on Pedal section” ‰ Press any pedal-
board key to specify the MIDI channel for the MBS
part.
•“Wizard Settings will be saved” (see step (7) on
page 22).
The “Wizard Connection” function sets the BK-7m’s
chord recognition to “Intelligent” (irrespective of
whether or not the [SPLIT] button lights) and acti-
vates the “Split” and “Arranger Type” filters of the
“Performance Hold” function to ensure that those
settings don’t change when you recall another Per-
formance memory or One Touch setting.
NOTE
Roland recommends leaving the [SPLIT] button off while
you are using the “MULTI CHANNEL” setting.
NOTE
Roland recommends leaving the [SPLIT] button off while
you are using one of these settings.
‘COMPUTER/SEQUENCER’ category
This “Wizard Connection” option configures the BK-7m
for use as a multitimbral sound module that is con-
trolled by a software sequencer running on your com-
puter.
•The only step will be “Wizard Settings will be
saved” (see step (7) on page 22).
NOTE
This option disables MIDI data reception by the BK-7m’s
Arranger and real-time parts, because all 16 MIDI channels are
already taken.
BK-7m_UK.book Page 25 Tuesday, January 4, 2011 9:25 AM
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-7M BACKING MODULE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-7M BACKING MODULE in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-7M BACKING MODULE

Roland BK-7M BACKING MODULE Additional guide - English - 10 pages

Roland BK-7M BACKING MODULE Additional guide - German - 10 pages

Roland BK-7M BACKING MODULE User Manual - German - 124 pages

Roland BK-7M BACKING MODULE User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info