708951

Roland BK-5 Manual

107
Zoom out
Zoom in
Previous page
1/160
Next page
Editing individual rhythm events (Micro Edit)
Backing Keyboard BK-5
r
107
■Create Event
Select this function to add a new event to the
selected track.
If the position for which you create a new event
already contains other events, the new event is added
at the end of that group.
The selected event is inserted with a default value:
Obviously, you will then need to change the default
settings depending on the result you want to
achieve.
Press the [WRITE] button to confirm your settings
and add the new event. The BK-5 returns to the
“Micro Edit” page.
■Erase Event
This function allows you to remove one or several
events without changing the positions of the
remaining events.
1.
Use the [CURSOR÷VALUE] dial to select the
event you want to delete.
The selected event is displayed at the center of the
display page.
NOTE
To select several consecutive events, press the [ENTER/
SELECT] button while rotating the [CURSOR÷VALUE] dial
towards the left (upward direction) or the right (downward
direction).
2.
Press the [ENTER/SELECT] button icon to
remove the event you selected.
The BK-5 returns to the “Micro Edit” page.
■Move Event
This function allows you to move one or several
events.
1.
Select the event you want to move.
2.
Select the “Move Event” function.
3.
Set “To Bar”, “To Beat” and “To CPT”.
NOTE
If the position to which you move the selected event
already contains other events, the moved event is added at
the end of that group.
NOTE
Events located at “1-01-00” cannot be moved further to
the left.
4.
Press the [WRITE] button to confirm your
settings and move the event.
The BK-5 returns to the “Micro Edit” page.
■Copy Event
This function allows you to copy one or several
events. Use “Place Event” to insert a copy of those
events at the desired position.
1.
Select the event you want to copy.
To select several consecutive events, press and hold
the [ENTER/SELECT] button while rotating the
[CURSOR÷VALUE] dial towards the left (upward direc-
tion) or the right (downward direction).
All events selected in this way appear on a gray back-
ground.
2.
Select the “Copy Event” function.
3.
Press the [ENTER/SELECT] button.
Each new selection will replace the previous one.
4.
Use the“Place Event” function to specify
where you want to insert the copied
event(s).
Parameter Setting Explanation
Event Note, Control
Change, Pro-
gram Change,
Pitch Bend,
Alteration
Mode
Allows you to specify
the event type you
want to add.
To Bar,
To Beat,
To CPT
See page 94. Specifies the position
where your new event
will be inserted.
Note: Note Number: 60 C4
On Velocity: 100
Gate Time: 60
Program Change: CC00 Bank Select MSB, value “0”
CC32 Bank Select LSB, value “4”
Program Change Number “1”
(The bank select messages are added
automatically: you don’t have to
worry about that.)
Pitch Bend: “0”
Alteration Mode: Nearest
Limit Low: Std
Limit High: Std
Parameter Setting Explanation
To Bar,
To Beat,
To CPT
See page 94. Specifies the position
to which the first
event (in chronologi-
cal order) of the
selected group should
be shifted.
BK-5_US.book Page 107 Thursday, May 23, 2013 7:01 PM
… 107 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-5 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-5

Roland BK-5 Additional guide - English - 6 pages

Roland BK-5 User Manual - German - 147 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info