708951
65
Zoom out
Zoom in
Previous page
1/160
Next page
‘Performance Edit’ parameters
Backing Keyboard BK-5
r
65
Octave Shift
Allows you to transpose the selected keyboard part in
octave steps.
Coarse Tune
Changes the pitch of the selected keyboard part in
semi-tone steps.
Fine Tune
Changes the pitch of the selected part in steps of 1
cent (1/100 semi-tone).
Portamento Mode
You can set the selected part to mono(phonic) mode.
Mono” means that you can only play one note at a
time. You could select this mode to play a trumpet or
woodwind part in a more natural way.
Poly”, on the other hand, means that you can play
chords using the selected part.
Portamento Time
“Portamento” means that the pitch doesn’t change in
clearly defined steps: it produces glides from one
note to the next. Use the this parameter to specify
the speed at which those glides are carried out. The
higher the value, the slower the transitions.
Bender Assign
This parameter allows you to specify for each key-
board part how it should respond to Pitch Bend mes-
sages.
Auto: The keyboard part only responds to left/right
movements of the BENDER/MODULATION lever when
no split setting causes it to be to the left of other
keyboard parts. In other words: parts you can play
with your left hand after selecting a split no longer
respond to pitch bend messages. But they will while
the keyboard is not split.
On: The keyboard part always responds to left/right
movements of the BENDER/MODULATION lever.
Off: The part in question does not respond to left/
right movements of the BENDER/MODULATION lever.
Bender Range
This parameter sets the pitch interval, i.e. the value
that will be used when the BENDER/MODULATION
lever is pushed all the way to the left or right.
Modulation Assign
This parameter allows you to specify for each key-
board part how it should respond to Modulation
messages (CC01).
Auto: The keyboard part only responds to backward
movements of the BENDER/MODULATION lever when
no split setting causes it to be to the left of other
keyboard parts. In other words: parts you can play
with your left hand after selecting a split no longer
respond to modulation messages. But they will while
the keyboard is not split.
On: The keyboard part always responds to backward
movements of the BENDER/MODULATION lever.
Off: The part in question does not respond to back-
ward movements of the BENDER/MODULATION lever.
Cut Off
This filter parameter allows you to make the selected
sound darker or brighter. Positive settings mean that
more overtones will be allowed to pass, so that the
sound becomes brighter. The further this value is set
in the negative direction, the fewer overtones will be
allowed to pass and the sound will become softer
(darker).
NOTE
For some sounds, positive (+) Cutoff settings will cause no
noticeable change because the preprogrammed Cutoff
parameter is already set to its maximum value.
Resonance
When the Resonance value is increased, the over-
tones in the area of the cutoff frequency will be
emphasized, creating a sound with a strong charac-
ter.
Parameter Setting
Octave Shift –4~0~+4
Parameter Setting
Coarse Tune –24~0~+24
Parameter Setting
Fine Tune –100~0~+100
Parameter Setting
Portamento Mode Poly, Mono
Parameter Setting
Portamento Time 0~127
Parameter Setting
Bender Assign Auto, On, Off
Parameter Setting
Bender Range 0~+24
Parameter Setting
Modulation Assign Auto, On, Off
Parameter Setting
Cut Off –64~+63
Parameter Setting
Resonance –64~+63
Characteristics of a low-pass filter
Cutoff frequency
Frequency
Setting
BK-5_US.book Page 65 Thursday, May 23, 2013 7:01 PM
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland BK-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland BK-5 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland BK-5

Roland BK-5 Additional guide - English - 6 pages

Roland BK-5 User Manual - German - 147 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info