527361
22
Zoom out
Zoom in
Previous page
1/236
Next page
20
Before You Start Playing
Using Headphones
The AT-90S/80S/60S features a Phones jack. This allows you
to play without having to worry about bothering others
around you, even at night.
fig.00-29
1. Connect the headphones to the Phones jack on
the underside of the unit.
The sound from the built-in speakers stops.
Now, sound is heard only through the headphones.
fig.00-30
2. Adjust the headphones volume with the [Master
Volume] slider and Expression pedal.
Accepts connection of Stereo headphones.
Some Notes on Using Headphones
fifig.00-31
To prevent damage to the cord, handle the headphones
only by the headset or the plug.
Headphones may be damaged if the volume is too high
when they are plugged in. Lower the volume on the AT-
90S/80S/60S before plugging in headphones.
To prevent possible auditory damage, loss of hearing, or
damage to the headphones, the headphones should not
be used at an excessively high volume. Use the
headphones at a moderate volume level.
Using a Microphone
The AT-90S/80S/60S is equipped with a Mic jack.
Since this instrument has a Mic In jack, you can use a
microphone to enjoy a variety of possibilities such as singing
along with your performance, or singing along with SMF
music files (sold separately).
fig.00-32
1. Connect the microphone to the Mic In jack on the
underside of the unit.
2. Use the [Mic Volume] knob to adjust the volume
level for the microphone.
You can adjust the depth of the echo applied to sound from
the microphone (p. 172).
The microphone must be purchased separately. When
purchasing a microphone, please consult the vender where
you bought the AT-90S/80S/60S.
NOTE
If the Input switch is set to “RSS,” RSS reverb will be applied
to the sound from the microphone. You can use the [Master
Volume] knob to adjust the microphone volume (p. 185).
Some Notes on Using a Microphone
fig.00-31
To avoid disturbing others, be careful of the volume
level when playing late at night or very early in the
morning.
When connecting a microphone to the AT-90S/80S/60S,
be sure to lower the volume. If the volume control is too
high when the microphone is plugged in, noise may be
produced by the speakers.
Howling could be produced depending on the location
of microphones relative to speakers. This can be
remedied by:
• Changing the orientation of the microphone.
• Relocating the microphone so it is farther from the
speakers.
• Lowering volume levels.
Phones
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT90S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT90S in the language / languages: English as an attachment in your email.

The manual is 8,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT90S

Roland AT90S User Manual - German - 228 pages

Roland AT90S User Manual - Dutch - 232 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info