527362
21
Zoom out
Zoom in
Previous page
1/236
Next page
19
Before You Start Playing
Connecting the Power Cord
1. First, make sure that the [Power On] switch at the
panel’s left side is OFF (not pushed in).
2. Connect the supplied power cord to the AC Inlet
connector, then plug the other end into an AC
outlet.
NOTE
Only use the power cord supplied with this instrument.
NOTE
Whenever you do not intend to use the instrument for
extended periods of time, pull out the power cord from the
AC outlet.
Turning the Power On and
Off
NOTE
Once the connections have been completed, turn on or off
power to your various devices in the order specified. By
turning on or off devices in the wrong order, you risk
causing malfunction and/or damage to speakers and other
devices.
Turning On the Power
1. Make sure of the following before the power is
turned on.
Is the power cable correctly connected to the AC inlet?
Is the power cable correctly connected to the AC outlet?
Is the [Master Volume] slider (located at the left of the
Lower Keyboard) set to the Min (minimum) position?
fig.00-26
2. Press the [Power On] button to turn on the power.
The Power indicator lights in red.
fig. 00-27
NOTE
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before the
unit will operate normally.
3. The [Master Volume] slider located on the left of
the Lower Keyboard panel is an overall control
for adjusting the volume of the entire instrument.
Now adjust the [Master Volume] slider to a suitable
level. The volume will be increased when the Expression
Pedal is pressed down, and decreased when the pedal is
returned.
fig.00-28
Turning Off the Power
1. Before switching the power off, set the [Master
Volume] slider to the Min (minimum) position.
2. Press the [Power On] button to turn off the power.
fig. 00-27
Master
Volume
Min
Max
Power On
ON
Lower position
increase
the volume
decrease
the volume
Master
Volume
Min
Max
Power On
OFF
Upper position
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT80S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT80S in the language / languages: English as an attachment in your email.

The manual is 8,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT80S

Roland AT80S User Manual - German - 228 pages

Roland AT80S User Manual - Dutch - 232 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info