527334
123
Zoom out
Zoom in
Previous page
1/148
Next page
121
Connecting with External Devices
Connecting with External Devices
If you want to hook up an external instrument to the ATELIER,
then this chapter is for you.
1.
Output
L/Mono, R Jacks
These jacks can be connected to your audio system to
enjoy more powerful sound.
2.
Input L/Mono, R Jacks
Using these jacks, you can connect other sound
generating devices or audio equipment and play sounds
from other devices through the ATELIER’s speaker.
3.
LCD Contrast Knob
4.
Phones Jacks
p. 18
Connect headphones here.
5.
MIDI Out/In Connectors
p. 123
You can connect external MIDI devices to the ATELIER
and exchange performance data between them.
6.
USB Connector
p. 122
Used for connecting a computer to the ATELIER using a USB
cable
.
Output Jack
You can connect audio equipment using audio cables (sold
separately) and play the sounds from the ATELIER through the
speakers on the connected equipment or record your
performances on a recording device.
If the output of the connected device is monaural, you must use
the L (Mono) jack.
Use an audio cable to connect the input jack on the audio set
or amp mixer to one of the output jacks on the ATELIER. Use
an audio cable with a standard plug. When purchasing an
audio cable, please consult the vendor where you bought the
ATELIER.
Input Jack
You can connect another sound module, such as audio
equipment or an electronic instrument using audio cables (sold
separately) and play the sounds from the connected device
through the speakers on the ATELIER.
If the input of the connected device is monaural, you must use
the L (Mono) jack.
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
1.
Turn down the volume all the way on all
equipment.
2.
Turn off the power to the ATELIER and other
connected equipment.
3.
Connect the ATELIER and other equipment with
audio cables (sold separately).
4.
Turn on the connected equipment.
5.
Turn on the ATELIER.
6.
Adjust the volume.
After use, follow the steps below to switch off the power.
7.
Turn down the volume all the way on all
equipment.
8.
Turn off the ATELIER.
9.
Turn off the connected equipment.
Names and Functions of Jacks
and Connectors
4 6
5
1 2 3
Connecting Audio Equipment
Making the Connections
AT-100-300_e.book 121 ページ 2008年5月7日 水曜日 午後3時33分
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT300 in the language / languages: English as an attachment in your email.

The manual is 19,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT300

Roland AT300 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info