527370
237
Zoom out
Zoom in
Previous page
1/308
Next page
235
Various Other Settings
Various Other Settings
The confirmation message appears on screen.
fig.00-43-2.eps
If you touch <Cancel>, the Panel Reset will not be
performed, and you will return to the System screen.
4.
Touch <OK>.
The Panel Reset operation will begin, and the settings
will return to the factory-set condition.
Never switch off the power while this operation is in
progress!
fig.00-40-2.eps
To reset only the User memory to its original factory settings,
refer to p. 233. If you want to reset all settings to their
factory-set state, refer to p. 27.
You can also use the following method to open the Panel
Reset confirmation screen.
1.
Touch <Quick Guide> on the Main screen, to
display the Quick Guide screen.
2.
Press the [Harmony Intelligence] button.
The Panel Reset confirmation screen appears.
The process of preparing USB memory or floppy disks so that
they can be used with the ATELIER is called “initialization”
(formatting).
In certain cases, particularly with floppy disks, the media is
formatted for a specific type of device. If the media format
does not match the ATELIER’s, you will not be able to use that
media with the ATELIER.
1.
Connect the USB memory to the External
Memory connector
If you want to initialize a floppy disk, connect your
floppy disk drive (sold separately) to the Ext Drive
connector, and insert the floppy disk.
2.
Touch <Registration> on the Main screen.
3.
Touch <go to Save>.
The Registration Save screen appears.
4.
Touch < > < > to select the media.
Choose
Ext Memory
if you want to initialize USB
memory, or choose
Disk
if you want to initialize a
floppy disk.
5.
Touch < > (Utility).
The Utility screen appears.
6.
Touch <Format>.
The Format screen appears.
If you touch <Cancel>, you will return to the Registration
Save screen without formatting.
7.
Touch <OK> to start formatting.
When the format is finished, the Registration Save
screen returns.
Never attempt to remove the USB memory until formatting is
complete.
NOTE
Formatting a USB Memory
(Format)
AT-900_e.book 235 ページ 2008年9月16日 火曜日 午前10時38分
237


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT 900C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT 900C in the language / languages: English as an attachment in your email.

The manual is 46,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT 900C

Roland AT 900C User Manual - German - 296 pages

Roland AT 900C User Manual - Dutch - 325 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info