527370

Roland AT 900C Manual

110
Zoom out
Zoom in
Previous page
1/308
Next page
108
Using the Registration Buttons
The ATELIER allows you to store sound settings and panel settings in the
Registration buttons.
The ATELIER has a total of twelve Registration buttons, and one set of panel
settings can be registered to each button, for a total of twelve types of panel
settings. Each set of panel settings that has been stored in a Registration button
is called a “Registration.”
This provides a convenient way to change large numbers of panel settings
during a performance, or to recall a complex panel setting.
fig.03-01.eps
About the Registration Buttons
In addition to assigning voices and Rhythms to the Registration buttons, you
can also store the following settings:
• Panel button settings (for example, settings for the Level [
▲
] [
▼
] buttons
and Solo [To Lower] button, etc.)
• Controller settings (functions assigned to foot switches, pitch bend range,
etc.)
• Other types of settings (reverb type, tempo settings, degree of initial
touch, etc.)
If you would like to know all of the settings that can be recorded to the
Registration buttons, refer to “Settings That Are Stored In the Individual
Registration Buttons” (p. 286).
The twelve settings stored at the Registration buttons can be saved as a “set”
in USB memory, a floppy disk, or User memory (p. 115).
In addition to the settings saved to the Registration buttons, the following data
is also saved when Registration sets are saved.
• Registration Name
→
p. 113
• Registration Shift
→
p. 137
• Arranger Update
→
p. 111
• Trans. Update (Transpose Update)
→
p. 219
• Exp. Curve (Expression Curve)
→
p. 139
• Rhythm Mode setting
→
p. 217
Settings that have been stored
to Registration buttons [1]–[12]
are remembered even if the
power is turned off. If you wish
to restore the settings stored in
the Registration buttons to their
factory settings, use the
“Factory Reset” operation (p.
27).
Recorded performance data
and Rhythms from User memory
(p. 84) are not stored in
Registration sets.
When a Rhythm saved in User
memory is assigned to a
Registration set, that Rhythm is
copied beforehand to the User
memory.
With the factory settings, the Arranger Update setting is set to “DELAYED.”
If Arranger Update is set to “DELAYED,” you will need to hold down the
Registration button for several seconds in order to recall the tempo and
Rhythm settings.
If you want the tempo and Rhythm settings to be recalled instantly when
you press a Registration button, change the Arranger Update setting to
”INSTANT.” For details, refer to “Recalling a Registration” (p. 110)
AT-900_e.book 108 ページ ２００８年９月１６日　火曜日　午前１０時３８分
… 110 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT 900C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT 900C in the language / languages: English as an attachment in your email.

The manual is 46,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT 900C

Roland AT 900C User Manual - German - 296 pages

Roland AT 900C User Manual - Dutch - 325 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info