527370
22
Zoom out
Zoom in
Previous page
1/308
Next page
20
Before You Start Playing
1.
Detach the pedal cord that is temporarily
fastened to the board on the upper part of the
Expression Pedal.
2.
Connect the pedal cord to the connector
located at the right side of the Pedalboard.
3.
Firmly tighten the screws of the pedal cable’s
plug.
4.
Slide the Pedalboard firmly all the way back
so that it is secure and unable to move.
fig.00-21.eps
Do not remove the fastener located near the Expression
Pedal. Before transporting the AT-900, be sure to wind up
the pedal cable so that there is no slack, and attach it to the
fastener.
A PK series pedal keyboard (sold separately) can be
connected to the AT-900C.
The AC adaptor supplied with the pedal keyboard is not used.
The pedalboard will be turned on/off by the power switch of
the AT-900C, regardless of the position of the pedalboard’s
own power switch.
1.
Make sure that the AT-900C and pedal
keyboard (PK series) are powered off.
2.
Use the PK cable that is supplied with the AT-
900C to connect the AT-900C’s PK IN connector
to the pedalboard’s PK OUT connector.
Once the connections have been completed, turn on power
to your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction
and/or damage to speakers and other devices.
3.
Turn on the power of the AT-900C (p. 24).
4.
Make sure that the indicator on the rear panel
of the pedalboard is lit.
Play the pedalboard. If you hear the pedal part of the
ATELIER, connections are complete.
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before
the unit will operate normally.
For details on pedal keyboard settings, refer to the owner’s
manual of the pedal keyboard.
For details on attaching the pedal keyboard and assembling
the stand, refer to the leaflet that describes how to assemble
the stand.
Attaching the Pedalboard
(AT-900)
Screw
NOTE
Attaching the Pedalboard
(AT-900C)
AT-900_e.book 20 ページ 2008年9月16日 火曜日 午前10時38分
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT 900C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT 900C in the language / languages: English as an attachment in your email.

The manual is 46,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT 900C

Roland AT 900C User Manual - German - 296 pages

Roland AT 900C User Manual - Dutch - 325 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info