708884
252
Zoom out
Zoom in
Previous page
1/270
Next page
251
Replacing the Illumination Bulbs
(AT-80SL Only)
Before replacing any light bulbs, you must turn off the
power and disconnect the power cord from the AC
outlet.
Wait until the bulb has cooled to room temperature
before attempting to replace it.
Never touch a bulb while it is still hot.
If the bulb burns out, replace it as soon as possible.
In households with small children, make certain that you
keep all bulbs or screws that you remove well out of the
reach of children, so they don’t accidentally put them
into their mouths.
Never turn on the power of the illumination while a bulb
is being replaced. If the illumination is powered-on, the
bulb will become hot, and may cause burns.
You must replace the bulb with a bulb of the specified
model number.
Before you continue
Note which bulb has burned out.
Before you begin, you must note the location of the bulb
that needs to be replaced, to ensure that the illumination
is not powered-on while replacing the bulb.
Leave the power turned off for at least 20 minutes before
changing the light bulb.
When the illumination is turned on, the light bulb and
the vicinity of the bulb will become hot. Turn off the
power of the instrument 20 minutes before changing the
light bulb, and verify that the vicinity of the bulb is no
longer hot before you exchange the light bulb.
Obtain the replacement light bulb.
Required items
Phillips screwdriver (no. 2) (when replacing the music
rest illumination bulb)
Slotted screwdriver (when replacing the pedal area
illumination bulb)
Replacement light bulb
Panel illumination
Remove the panel lamp cover
1.
Unplug the power cord from the AC outlet.
2.
Use both hands to slightly raise the cover, slide it
toward the rear, and open the cover.
3.
In four locations of the panel lamp cover (A),
loosen screws (B).
NOTE
The panel lamp cover screws cannot be removed from the
panel lamp cover.
NOTE
Do not remove any screws other than those in the specified
four locations.
fig.01
4.
Lift the panel lamp cover (A) slightly, and remove
it from the hook.
fig.02
Illuminated location
Bulb type
Panel illumination
LAMP FB33
hook
A
AT-80SL_60SL_e.book 251 ページ 2004年3月23日 火曜日 午前9時34分
252


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-60SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-60SL in the language / languages: English as an attachment in your email.

The manual is 13,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT-60SL

Roland AT-60SL User Manual - German - 266 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info