708882
250
Zoom out
Zoom in
Previous page
1/272
Next page
248
Error Message
Error Message
Meanings
Copy Protected.
Can’t Save.
To protect the copyright, this music file cannot be saved as SMF format.
Write-Protected Media.
The protect tab of the storage media is set to the Protect (write prohibit) position.
Move the tab to the Write (write permit) position and try the operation again.
Can’t Save This Song.
You can only play the music data. It cannot be saved on a storage media.
Master Disk
This storage media does not allow initialization or saving. Insert a different storage media and try the
operation again.
Read Only File.
You cannot overwrite-save or delete a file on this storage media.
No Media
Storage media is not connected. Please connect storage media.
Media Full
Saving is not possible because the storage media does not have enough space. Please use other
storage media that has been formatted by the ATELIER.
Unknown Media
This storage media cannot be used. Please format it.
Media Ejected
The storage media was disconnected while it was being accessed. Please try the operation again.
Damaged Media
A damaged area was found on the storage media.
Can’t Read
This data cannot be read.
Can’t Play
Playback was halted because the song could not be read fast enough.
The song could not be read from the storage media fast enough for playback. Press the [Reset] button,
then press the [Play/Stop] button once again.
No Rhythm
There is no Rhythm in user memory.
The Rhythm used by the selected Registration was deleted from user memory, or its order was changed.
Designated positions are
incorrect.
When calibrating the touch panel, the appropriate point was not touched correctly.
If you touch a location other than the specified point, the discrepancy may become severe.
Please be sure to touch the correct point.
Memory Full
The song data is excessively large, and cannot be loaded.
The performance data is excessively large, and cannot be loaded.
Recording or editing is not possible because the memory of the ATELIER is full.
MIDI Buffer Full
The ATELIER cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the
amount of MIDI data sent to the ATELIER.
Communication Error
A MIDI cable or computer cable has been disconnected. Connect it properly and securely.
The ATELIER is unable to handle the data that was sent. Please send data that the ATELIER is able to
handle.
A MIDI transmission error
has occurred.
Data transfer failed. Please transfer the data again.
Memory Error
An error occurred in internal memory. Please perform the operation again. If this indication appears
even after you’ve repeated the operation several times, please contact Roland service.
Not found
A Rhythm or Registration that meets the conditions was not found.
This is Registration data of a
type that is not supported.
This instrument cannot use this Registration.
The Ext Memory port was
subjected to excessive
current.
USB memory not supported by the ATELIER was connected. This USB memory cannot be used with the
ATELIER.
AT-500_e.book 248 ページ 2008年7月28日 月曜日 午後4時17分
250


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-500 in the language / languages: English as an attachment in your email.

The manual is 55,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT-500

Roland AT-500 User Manual - German - 269 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info