163
Aufnahme und Wiedergabe
Aufnahme und Wiedergabe
Sie können Ihre Spieldaten entweder solo oder auch mit
Rhythmus oder/und Automatischer Begleitung aufzeichnen.
fig.07-12.eps
1. Stellen Sie die Bedienregler auf der
Bedienoberfläche für die Aufnahme ein.
2. Drücken Sie den [Rec]-Taster
( = Aufnahmebereitschaft).
Die [Rec]-Taster-Anzeige leuchtet, und der [Play/Stop]-
Taster blinkt.
3. Drücken Sie den [Play/Stop]-Taster, um die
Aufnahme zu starten.
Das Metronom spielt vor der Aufnahme zwei Takte als
Vorzähler.
Wenn Sie die Daten für Rhythmus und Begleitung mit
aufnehmen möchten, drücken Sie den [Start/Stop]-Taster
anstelle des [Play/Stop]-Tasters. Wenn die Anzeige des
[Sync]-Tasters leuchtet (Sync Start = ON), wird die
Aufnahme dann gestartet, wenn Sie auf dem unteren
Manual eine Note bzw. einen Akkord spielen.
4. Drücken Sie den [Play/Stop]-Taster, um die
Aufnahme wieder zu stoppen.
Die Track-Anzeige der Aufnahme-Spur wechselt von
“Blinken” zu “konstant leuchten”. Wenn Sie während
der Aufnahme des Rhythmus bzw. der Begleitung den
[Intro/Ending]-Taster (oder [Start/Stop]-Taster) drücken,
wird der Rhythmus bzw. die Begleitung gestoppt, aber
die Aufnahme selbst läuft weiter. Drücken Sie dann den
[Play/Stop]-Taster, um die Aufnahme zu beenden.
Die Funktionen “Play“ und “Stop“ können den Fußschaltern
links und rechts des Expression Pedals zugewiesen werden
(S. 121).
Sie können das Metronom in der Vorzähl-Phase auch
ausschalten (S. 207).
Wichtig
Wenn Sie den [Rec]-Taster drücken, während ein Song
ausgewählt ist, wird der Song in den internen Speicher
geladen, und der Composer ist danach aufnahmebereit.
Wenn Sie einen vollständig neuen Song aufnehmen möchten,
gehen Sie wie folgt vor:
1. Drücken Sie den [Rec]-Taster, um die
Aufnahmebereitschaft abzuschalten.
2. Melden Sie den externen Speicher ab.
Ziehen Sie den USB-Speicher heraus bzw. nehmen Sie
die Diskette aus dem Laufwerk.
3. Löschen Sie die bisher aufgenommenen
Spieldaten (S. 167).
4. Nehmen Sie die neuen Spieldaten auf.
fig.07-12-2.eps
Wenn das folgende Display erscheint
Das folgende Display erscheint, wenn der
Aufnahmespeicher voll ist und keine Daten mehr
aufzeichnen kann:
fig.E-30.eps
In diesem Fall wird die Aufnahme automatisch
abgebrochen.
Die Aufnahme