708881
54
Zoom out
Zoom in
Previous page
1/84
Next page
54
Record and Playback Your Performance
Layering a New Recording onto SMF
Music Files
You can load commercially available SMF music files into the AT-5, and
record your own performance on top of it. During recording, the data
you’ve loaded will be played back, while everything you play will be
recorded.
1. Insert a floppy disk containing commercially available SMF
music files into the floppy disk drive.
2. Press the Select [-] [+] buttons to select the music file that
you wish to load into the AT-5.
3. Press the [Rec] button to enter record-ready mode.
The selected music file will be loaded.
While performance data is being loaded, the following screen will appear.
The [Rec] button indicator will light, and the [Play/Stop] button indicator
will blink.
4. Make the panel settings that you wish to record.
5. Press the [Play/Stop] button to begin recording.
When you press the [Play/Stop] button, the metronome will play two
measures (bars) of count-in before recording begins.
As you record, the music file that was loaded into the AT-5 will play back.
Your own performance (on the upper and lower parts) will be recorded on
top of the music files that you’ve loaded.
When the music files include performance data on Channel 1, Channel 3, or
Channel 4, that performance data is deleted, and the performance on the
upper part or lower part is recorded.
6. Press the [Play/Stop] button to stop recording.
Part AT-5 Track Channel of the SMF
Lower Lower 3
Upper Upper 1, 4
The performance data you
recorded can be saved on a
floppy disk (p. 51).
NOTE
Commercially sold music
files can also be loaded into
the AT-5, but for reasons of
copyright protection,
cannot be saved in SMF
format.
You can re-record the bass
performance. For details
refer to “Re-recording the
Bass Performance” (p. 60).
NOTE
The performances of
Channel 2 in SMF music
files are deleted when bass
performances are recorded
over again.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-5 in the language / languages: English as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info