527353
192
Zoom out
Zoom in
Previous page
1/228
Next page
192
Troubleshooting
Vertical lines can be seen in
the screen.
This is attributable to the design
fundamentals of a liquid crystal
display, and does not indicate a
malfunction.
Adjusting the display’s contrast can
make such lines less noticeable, so
you may want to try adjusting it.
p. 184
The Bass Range Sounds Odd,
or There Is a Vibrating
Resonance.
Playing at loud volumes may cause
instruments near the AT-45 to
resonate. Resonance can also occur
with fluorescent light tubes, glass
doors, and other objects. In
particular, this problem occurs more
easily when the bass component is
increased, and when the sound is
played at higher volumes.
Use the following measures to
suppress such resonance.
Place speakers so they are 10-15 cm
from walls and other surfaces.
Reduce the volume.
Move the speakers away from any
resonating objects.
- - -
When listening through
headphones:
Here, a different cause (such as
resonance produced by the AT-45)
would be suspect.
Consult your Roland dealer or
nearest Roland Service Center.
- - -
The volume level of the
instrument connected to AT-
45 is too low.
Could you be using a connection
cable that contains a resistor?
Use a connection cable that does not
contain a resistor.
p. 185
Pressing the expression
pedal while playing back
Atelier performance data
produces a crackling noise
The expression pedal function is set
to “PEDAL+COMPOSER” during
playback of Atelier performance
data.
When this setting is used, moving
the expression pedal while playing
back Atelier performance data may
create a difference between the
expression pedal information in the
performance data and the volume as
set with the expression pedal, which
can result in this kind of sound being
produced.
Set the expression pedal function to
“PEDAL” during playback.
p. 171
Tempo not changing even
when the source tempo is
reselected (when correcting
rhythms using the Rhythm
Customize function).
Auto Std Tempo (Auto Standard
Tempo) is set to OFF.
When you switch rhythms while the
rhythm is stopped, the tempo is
automatically set to the new rhythm.
The tempo setting is not changed
automatically even when you switch
rhythms while the rhythm is
stopped.
Turn “Auto Std Tempo” on.
p. 173
Unable to save created
rhythm to the User Memory
“Memory Full” appears in the
display.
The available memory remaining in
the AT-45 is not sufficient.
The available memory remaining in
the AT-45 is not sufficient.
First delete some other rhythm
saved to the user memory, then save
the rhythm you have created to the
user memory once again.
p. 77
p. 168
Problem Check Solution Page
AT-45_e.book 192 ページ 2005年2月21日 月曜日 午後5時43分
192


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT 45 in the language / languages: English as an attachment in your email.

The manual is 14,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT 45

Roland AT 45 User Manual - Dutch - 228 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info