527353

Roland AT 45 Manual

185
Zoom out
Zoom in
Previous page
1/228
Next page
185
Chapter 11 Connecting with External Device
Connecting to Audio
Equipment
When you connect the AT-45 to audio equipment, you can
play the sounds from the AT-45 through the speakers on the
audio equipment or record your performances on a tape
recorder or other recording device.
When connecting, please use an audio cable with a standard
phone plug, such as the PCS-100PW (sold separately). When
purchasing an audio cable, please consult the vendor where
you bought the AT-45.
Connectors
Output Jacks
You can connect audio equipment using audio cables (sold
separately) and play the sounds from the AT-45 through the
speakers on the connected equipment or record your
performances on a tape recorder or other recording device.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
fig.
Input Jacks
You can connect another sound module, such as audio
equipment or an electronic instrument using audio cables
(sold separately) and play the sounds from the connected
device through the speakers on the AT-45.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
fig.
Making the Connections
When connecting, turn on power to your various devices in
the order specified. Failure to follow these steps in the order
given could cause a malfunction and/or damage to speakers
or other equipment.
Playing Sounds from the AT-45 Through the
Speakers on Audio Equipment or Recording
Your Performances on a Recording Device
1.
Turn the volume all the way down on the AT-45
and on the device you’re about to connect.
2.
Turn off the power to the AT-45 and other
connected equipment.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the AT-45.
5.
Switch on the connected device.
6.
Adjust the volume level on the AT-45 and the
connected device.
Recording AT-45 Performances on a Recording
Device
7.
Start recording with the connected device.
8.
Play the keyboard.
9.
When the performance ends, stop recording on
the connected equipment.
Playing Audio Equipment Sounds Through the
Speakers on the AT-45
1.
Turn the volume all the way down on the AT-45
and on the device you’re about to connect.
2.
Turn off the power to the AT-45 and other
connected equipment.
3.
Use audio cables (sold separately) to make the
connection.
4.
Turn on the connected equipment.
5.
Turn on the AT-45.
6.
Adjust the volume level on the AT-45 and the
connected device.
After use, turn off the power using the following procedure.
1.
Turn the volume all the way down on the AT-45
and on the device you’re about to connect.
2.
Turn off the connected equipment.
3.
Turn off the AT-45.
AT-45_e.book 185 ページ ２００５年２月２１日　月曜日　午後５時４３分
… 185 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT 45 in the language / languages: English as an attachment in your email.

The manual is 14,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT 45

Roland AT 45 User Manual - Dutch - 228 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info