527352
105
Zoom out
Zoom in
Previous page
1/132
Next page
105
Detailed Settings for Various Functions
MIDI Settings
Selecting the MIDI Transmit Channel
(Tx MIDI Channel)
When you use the MIDI connectors of the ATELIER to transmit musical
data to external devices, for each keyboard (Upper, Lower, and Pedal)
you can specify the channel on which your playing will be transmitted
as MIDI messages. You can modify these Tx (Transmit) MIDI settings as
needed.
Parameter Channel
Solo, Upper, Lower,
Pedal, Drums, M.Perc,
Control
1–16
MEMO
For details refer to “Connecting MIDI Devices (p. 113).
The Control part transmits expression pedal data and PC numbers.
MIDI IN Mode (MIDI IN Mode)
The ATELIER contains two sound generators: one for SMF data
playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control only
the sound generator for SMF data playback. However by changing
the MIDI IN Mode setting, you can also control the keyboard sound
generator from MIDI In.
Value Explanation
MODE 1 Control the instrument as a GS sound generator.
MODE 2
Channels 5 through 10 and Channels 12, 14,
15 are transmitted to the GS sound generator,
and all other channels are transmitted to the
keyboard sound generator.
How channels correspond to the MIDI IN mode
Channel MODE 1 MODE 2
1 GS Solo
2 GS Pedal/GS *
3 GS Lower
4 GS Upper
5–10 GS GS
11 GS Drums/SFX
12 GS GS
13 GS Manual Percussion
14, 15 GS GS
16 GS Control
* : When the pedal part button is ON, data received at the MIDI In
connector will control the pedal part of keyboard sound generator.
When the pedal part button is OFF, data received at the MIDI In
connector will control the GS sound generator.
* There are limitations on the types of MIDI messages that can be
received by the keyboard sound generator.
Specifying Transmission of PC Numbers
(Send PC Switch)
Transmission of PC (Program Change) numbers can be switched ON/
OFF.
Value Explanation
ON PC numbers are transmitted.
OFF PC numbers are not transmitted.
Setting PC Numbers (PC Number)
You can specify the Program Change number that will be transmitted
from MIDI Out when a Registration is selected.
Value Explanation
Bank MSB
(Bank Select MSB)
0–127
Bank LSB
(Bank Select LSB)
0–127
PC Num
(PC Number)
1–128
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AT-350C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AT-350C in the language / languages: English as an attachment in your email.

The manual is 57,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AT-350C

Roland AT-350C User Manual - German - 128 pages

Roland AT-350C User Manual - Dutch - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info