708875
30
Zoom out
Zoom in
Previous page
1/84
Next page
30
MFX 08: REVERB MFX 09: LINE DRIVE
* This reproduces the distortion that occurs when an electrical cir-
cuit is slightly overloaded.
MFX 10: COMPRESSOR
Parameter
Value Description
Type
ROOM1,
ROOM2,
STAGE1,
STAGE2,
HALL1,
HALL2
Type of reverb
ROOM1
: short reverb with high density
ROOM2
: short reverb with low density
STAGE1
: reverb with greater late rever-
beration
STAGE2
: reverb with strong early reflec-
tions
HALL1
: very clear-sounding reverb
HALL2
: rich reverb
Pre Delay 0.0–100 ms
Adjusts the delay time from the direct
sound until the reverb sound is heard.
Time 0–127 Time length of reverberation
HF Damp
200–
8000 Hz,
BYPASS
Adjusts the frequency above which the
high frequency content of the reverb
sound will be cut, or “damped.” If you do
not want to cut the high frequencies, set
this parameter to BYPASS.
Low Gain -15–+15dB Boost or cut in the low end
High Gain -15–+15dB Boost or cut in the high end
Balance
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the reverb sound (W)
Level 0–127 Output Level
Parameter
Value Description
Strength
SOFT, HARD
HARD produces stronger distortion than
SOFT.
Type 1, 2 Varies the nuances of the distortion.
Drive 0–127
Degree of distortion
This also affects the volume.
Low Gain -15–+15dB Boost or cut in the low end
High Gain -15–+15dB Boost or cut in the high end
Level 0–127 Output Level
Parameter
Value Description
Attack
0–127
This sets the time it takes until the level is
compressed after the input exceeds the
Threshold.
Threshold 0–127
Adjusts the volume at which compression
begins
Post Gain 0–+18dB Adjusts the output gain.
Low Gain -15–+15dB Boost or cut in the low end
High Gain -15–+15dB Boost or cut in the high end
Level 0–127 Output Level
ARX-02_e.book 30 ページ 2008年3月7日 金曜日 午後7時22分
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland ARX-02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland ARX-02 in the language / languages: English as an attachment in your email.

The manual is 4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info