708869
52
Zoom out
Zoom in
Previous page
1/72
Next page
52
Error messages
If an incorrect operation is attempted or execution is not
possible, an error message will appear in the display. Note
the message that appears, and take the appropriate action.
fig.er-3
Situation: It is possible that the data in the PC card or the
PC card itself has been damaged.
Action: Delete all phrases (p. 25). If delete card is not
possible, or if the same message appears after
the card has been delete card, it may be that
the PC card is malfunctioning. Use a different
PC card.
fig.er-4
Situation: The card is of a type which the AR-200 is not
able to use.
Action: Refer to the section "Reccomended PC cards"
(p. 66) and use an appropriate PC card.
fig.er-5
Situation: No more data can be recorded in the card.
Action: Either delete unnecessary phrases (p. 25), or
use a different card.
fig.er-6
Situation: Either the phrase data is damaged, or the
AR-200
is not able to handle the phrase.
Action: Check the phrase for which the message was
displayed.
fig.er-7
Situation: The write protect switch on the PC card is set
to the ON position.
Action: Refer to the manual for the PC card, and set
the write protect switch to the OFF position.
fig.er-8
Situation: The backup battery in the PC card has run down.
Action: Refer to the manual for the PC card and
replace the battery.
fig.er-9
Situation: A large amount of MIDI data was received in a
short time, and could not be processed.
Action: Change the way in which MIDI data is being
transmitted.
fig.er-10
Situation: Once an Active Sensing message was received,
300 msec elapsed without any message being
received.
Action: Check the MIDI cable connect or turn off.
fig.er-11
Situation: The PC card is not formatted for use with the
AR-200.
Action: Format the PC card.
fig.er-12
Situation: There is no phrase corresponding to the
specified phrase.
Action: Select a saved phrase or record a new phrase.
fig.er-13
Situation: Data was not written to or read from the card
in time.
Action: Change the RDAC-Grade, RDAC-Mode, or
other recording conditions to reduce the
amount of data.
fig.er-14
Situation: Card protect is set to ON, so data cannot be
written to the card.
Action: Set card protect to OFF.
fig.er-15
Situation: The AR-200 gets hot.
Action: Ventilate well to avoid overheating, and keep
the unit cool.
fig.er-16
Situation: Cannot overwrite or make changes on a card
formatted for the AR-2000.
Action: Use a card after formatting it on the AR-200, or
otherwise use an AR-3000 format card.
Situation: Checksum error found in received MIDI data.
Action: Check the transmission status and the MIDI
data.
AR-200_e.book 52 ページ 2003年7月14日 月曜日 午後1時11分
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AR-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AR-200 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info