708869
44
Zoom out
Zoom in
Previous page
1/72
Next page
44
Controlling the AR-200 with MIDI Signals (MIDI control)
AR-200 Settings
MIDI Receive channel Settings (MIDI
channel)
This sets the MIDI receive channel. MIDI allows you to
independently control two or more devices over a single
MIDI cable. For example, when the MIDI channel for the
sending device is set to “1,” then unless the MIDI channel of
the receiving device (here, the AR-200) is also set to “1,” the
MIDI message is not transmitted.
Off : MIDI messages will not playback phrases.
1-16: Only the MIDI messages on the selected channel are
received and played back.
All : MIDI messages of any channel will playback phrases.
With cards formatted on the AR-2000, you can check the
MIDI reception channel settings, but they cannot be changed.
Procedure for Making the MIDI Receive
Channel Settings
1.
While holding down the PLAY button, insert the card
into the card slot.
The MIDI indicator will blink, and the display will indicate
the receive channel.
2.
Press the [ ]/[ ] dial to select the MIDI Receive
channel (OFF/1-16/ALL).
3.
Press the PLAY button to set the specified MIDI receive
channel.
The MIDI indicator lights, and the phrase number is
displayed.
If you press the STOP button, the MIDI receive channel
setting will be canceled.
MIDI Control Signals That Can Be
Received (Receive Messages)
If you use a card whose settings have been made on the AR-
3000, the following MIDI message can be received by the AR-
200.
Note On Velocity: Volume level when playback of the
phrase starts
Panpot (CC10): Changes the positioning of the sound in
the left and right channels
Expression (CC11): Changes the master volume
For more a detailed explanation of MIDI, refer to
"MIDI
Implementation"
and
"MIDI Implementation Chart"
(p. 58-
p. 64).
MIDI Note Out
Moreover, by using an optional AR-3000 to create and edit
phrases, the following function are also possible.
For detailed information, please refer to the AR-3000 user’s
manual.
If MIDI Note Out is set to “ON,” then when an audio phrase
is played back, the MIDI Note Number On/Off signals set in
"MIDI Note Map"
(p. 43) are output from the MIDI OUT
connector.
In this case, if two or more note numbers have been assigned
to that playback phrase, only the lowest note number will be
transmitted.
The MIDI signals are output through the channel set through
the MIDI Receive channel.
If the MIDI Receive channel is set to :
“OFF”: There is no output
“1-16”: Only the MIDI signals in the selected channel
are input and output
“ALL”: Output is through Channel 1
* If you are using Note messages to control two or more AR-200
units, set the MIDI Note Trigger setting of the slave AR-200
units to “Trig.””Trigger” is selected when the card is
formatted. However, this setting cannot be changed on the
AR-200.
* Even when playing back MIDI phrases, Note Number On/Off
signals are not output.
AR-200_e.book 44 ページ 2003年7月14日 月曜日 午後1時11分
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AR-200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AR-200 in the language / languages: English as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info