23019
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
How to Use the ANTI-FEEDBACK
“Anti-feedback” is a function that suppresses feedback that
occurs between the guitar and the amp. Feedback is
suppressed by cutting the volume in frequencies at which it
occurs.
The AD-8’s anti-feedback function automatically detects the
frequencies at which feedback occurs, and automatically
attenuates the sounds at the detected frequencies, so feedback
is rapidly and accurately suppressed.
Before Using the Anti-Feedback
First, adjust the AD-8’s output level, the distance between
the guitar and the amp and between the guitar and the
speakers, the direction the guitar is facing, and other
factors making it harder for feedback to occur.
When using the anti-feedback feature, you can suppress
feedback at one point.
If the feedback cannot be successfully suppressed using
the anti-feedback feature, you'll need to go back and
readjust your setup.
1.
Simultaneously press the MEMORY
pedal and
MEMORY
pedal.
fig.06-08
The ANTI-FEEDBACK indicator flashes, and the
frequencies at which feedback occurs are automatically
detected.
* Refrain from producing sound while the frequency at which
feedback occurred is being detected automatically.
Once detection is completed, the indicator stops flashing
and remains lit, and sounds at the detected frequencies as
well as at frequencies one octave higher are cut.
* Anti-feedback is not applied when there is no input, or if no
feedback is detected at any frequency.
* If you again hold down the MEMORY
pedal and
MEMORY
pedal together while the ANTI-FEEDBACK
indicator is lit, the anti-feedback is cancelled, and detection of
frequencies with feedback begins again.
To exit the anti-feedback function, hold down the
MEMORY
pedal and MEMORY
pedal for at least
two seconds.
* The anti-feedback settings are not stored when in MANUAL
mode.
If you perform the Write operation while the ANTI-FEEDBACK
indicator is lit, the AD-8 stores the tone with the anti-feedback
applied.
Anti-feedback is always off (the ANTI-FEEDBACK indicator
is off) when the power is turned on.
AD-8_e.book 19 ページ 2007年6月20日 水曜日 午前9時34分
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AD8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AD8 in the language / languages: English, German as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info