23019
16
Zoom out
Zoom in
Previous page
1/28
Next page
16
Operation
Storing Settings (Write Operation)
You can store up to four groupings of panel knob settings (MEMORY 1–4).
* The anti-feedback effect settings can also be stored.
Storing the “MANUAL” Sound in
Memory
1.
Create the sound you want using knobs.
2.
Press the WRITE button.
The MEMORY indicator and the indicator for the
currently selected memory flash, and the AD-8 is put into
write standby.
fig.03-03
3.
Press the SELECT button to select the memory
(number) to which you want to store the sound.
The indicator for the selected memory number flashes.
fig.03-04
4.
Press the WRITE button.
The write operation is completed when the indicator for
the write-destination memory begin to flash more rapidly.
Do not switch off the power while a write operation is in
progress.
fig.03-05
* To cancel the write operation, then before you press the WRITE
button, rotate the knob, press the BYPASS/MUTE button,
PITCH button, or operate the ON/OFF pedal.
Changing and Storing the “MEMORY”
Sound
1.
Press the MEMORY
/
pedal or the SELECT
button to change to the “MEMORY” sound.
2.
Operate the knobs to change the sound.
3.
Press the WRITE button.
The MEMORY indicator and the indicator for the
currently selected memory number start to flash, and the
AD-8 is put into write standby.
fig.03-06
4.
Press the SELECT button to select the memory
(number) to which you want to store the sound.
The indicator for the selected memory number flashes.
fig.03-07
5.
Press the WRITE button.
The write operation is completed when the indicator for
the write-destination memory begin to flash more rapidly.
Do not switch off the power while a write operation is in
progress.
fig.03-08
* If the knob or the pedal position is changed before the WRITE
button is pressed, the write operation is cancelled, and the AD-
8 is returned to the status in effect in Step 2 (when the
“MEMORY” sound has been changed).
Write Standby
Flash
Write Standby
FlashFlash
Flash
Writing Write Finished
Flash rapidly
Write Standby
Flash
FlashFlash
LitFlash rapidly
AD-8_e.book 16 ページ 2007年6月20日 水曜日 午前9時34分
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AD8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AD8 in the language / languages: English, German as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info