527326
7
Zoom out
Zoom in
Previous page
1/76
Next page
Panel Descriptions
5
Deutsch Français Italiano Español Português NederlandsEnglish
NOTE
To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
• When connection cables with resistors are used, the volume level of equipment connected to the inputs (GUITAR CHANNEL, MIC/LINE CHANNEL,
AUX IN) may be low. If this happens, use connection cables that do not contain resistors.
8
Jack Panel (Connecting Your Equipment)
7 8 9 10 11
11
FOOT SW jack
If footswitches are connected, you’ll be able to
control the turn eects on/o using your foot.
* You’ll need momentary-type footswitches
(BOSS FS-5U or FS-6; sold separately).
• Chorus on/o and Reverb on/o operations
apply in common to the GUITAR CHANNEL
and the MIC/LINE CHANNEL.
• If the [CHORUS] switch is OFF” or if the
[REVERB] knob is at 0, you won’t be able to
turn chorus or reverb on/o by operating the
footswitch.
• If you use a phone plug (mono) cable to
connect only one footswitch, it will only turn
chorus on/o.
7
DC IN jack
Connect the included AC adaptor here.
* You must use only the AC adaptor that is supplied with
the AC-40.
PHONES jack
Connect headphones
equipped with a stereo
mini-plug.
9
LINE OUT jacks
You can connect your mixer or
recorder here.
Connect to the L/MONO jack if you’re
outputting in mono.
* The [MASTER] knob does not aect the output from
the LINE OUT jacks.
10
AUX IN jack/[LEVEL] knob
Use the stereo mini-cable to connect your
CD player or digital audio player here.
Use the [LEVEL] knob to adjust the volume.
* The chorus/reverb is not applied to AUX
IN jack.
Set the polarity switch of the footswitches as
shown in the illustration.
MODE/POLARITY switches
B A
BOSS FS-6
BOSS FS-5U
Red
(RING)
BOSS FS-5U BOSS FS-6
or
POLARITY switch
Cable:
Stereo 1/4”
phone type
2
Stereo 1/4”
phone type
Cable:
Stereo 1/4”
phone type
2
1/4” phone type
x 2
REVERB
on/o
CHORUS
on/o
REVERB
on/o
CHORUS
on/o
White
(TIP)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AC-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AC-40 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 20,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info