481061
12
Zoom out
Zoom in
Previous page
1/116
Next page
10
Looper function
This function lets you record a phrase you perform, and then play it
back repeatedly. You can also overdub additional phrases onto the
recording.
On the AC-33, this is called the Looper function.
REC Indicator
This will light red during
recording.
PLAY Indicator
This will light green during
playback.
OVERDUB Indicator
This will light yellow during
overdubbing.
REC/PLAY/OVERDUB Button
Press this button when
you want to record, play, or
overdub.
STOP/CLEAR Button
Press this button to stop
the looper or to erase the
recording.
Recording a phrase
Press the [REC/PLAY/OVERDUB] button to recording a phrase.
The basic operation will change as follows according to the state of the
phrase.
Pressing the [REC/PLAY/OVERDUB] button
Pressing the [STOP/
CLEAR] button
Phrase operation
Stop Record Play Play Play Stop
• • •
1 2 3 4
1
While producing sound, turn the [VOLUME] knob to adjust
the recording level.
2
Press the [REC/PLAY/OVERDUB] button to start recording.
The AC-33 will enter recording-standby mode when
you press the button. Recording will begin when you
start performing.
If you’re using a foot switch, recording will start when
you press the foot switch.
The AC-33’s memory can record a phrase approximately 40 seconds
long. When you reach the maximum recording time, recording will
stop automatically and playback will start.
3
Press the [REC/PLAY/OVERDUB] button to stop recording.
At the same time that you press the button, the
recorded phrase will switch to playback.
The phrase will continue playing repeatedly until you
stop it.
4
To stop playback or overdubbing, press the [STOP/CLEAR]
button.
The phrase will stop playing.
If you want to play again, press the [REC/PLAY/
OVERDUB] button.
MEMO
If a phrase has already been recorded, the PLAY
indicator will blink.
NOTE
The recorded phrase will be erased when you switch o the AC-33’s
power.
Playing back the phrase
Pressing the [REC/PLAY/OVERDUB] button
Pressing the [STOP/
CLEAR] button
Phrase operation
Stop Play Play Play Play Stop
• • •
1 2
1
With the PLAY indicator blinking, press the [REC/PLAY/
OVERDUB] button.
The PLAY indicator will light, and the phrase will play
repeatedly from the beginning.
2
Press the [STOP/CLEAR] button to stop playback.
The PLAY indicator will blink.
Overdubbing the phrase
Pressing the [REC/PLAY/OVERDUB] button
Pressing the [STOP/
CLEAR] button
Phrase operation
Stop Play Overdub Play Overdub Play Stop
1 2 23 3 4
1
With the PLAY indicator blinking, press the [REC/PLAY/
OVERDUB] button.
The PLAY indicator will light, and the phrase will play
repeatedly from the beginning.
2
Press the [REC/PLAY/OVERDUB] button once again.
The OVERDUB indicator will light, and overdubbing
will begin.
3
To stop recording, press the [REC/PLAY/OVERDUB] button.
The PLAY indicator will light, and the phrase will play
repeatedly from the beginning.
4
Press the [STOP/CLEAR] button to stop playback.
The PLAY indicator will blink.
Looper Function
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland AC-33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland AC-33 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 74,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland AC-33

Roland AC-33 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info