* Use only the AC adaptor that is supplied with the AC-33.
1. Make sure that the [POWER] switch is o.
2. Connect the included power cord to the
included AC adaptor.
3. Connect the AC adaptor to the DC-IN jack.
4. Plug the power cord into an AC outlet.
Connect the electrical ground as well.
1
4
3
2
Installing batteries
-
-
+
-
+
+
-
+
-
-
+
-
+
+
-
+
1. Loosen the screws from these
two locations.
2. Remove the battery compart-
ment cover.
3. Insert batteries, taking care to
observe the correct polarity.
Removing the battery case
Although it is possible to replace the batteries without removing the
battery case, battery replacement will be easier if you remove the
battery case.
1. Loosen the screws from these
two locations.
2. Remove the battery case.
* We recommend that you keep batteries installed in the unit even
though you’ll be powering it with the AC adaptor. That way, you’ll be
able to continue a performance even if the cord of the AC adaptor
gets accidently disconnected from the unit.
* To prevent malfunction and speaker damage, make sure to switch
o the AC-33’s power before you insert or replace its batteries, and
before connecting it to other devices.
* Take care that no metal object touches the contacts of the battery
case. This can short-circuit the batteries, causing the case to
overheat or burn.
About batteries
Batteries that can be used
The AC-33 uses eight AA alkaline or nickel-metal hydride batteries.
* Nickel-metal hydride batteries cannot be recharged by the AC-33
itself. You’ll need to use a commercially available battery manufac-
turer.
* When using nickel-metal hydride batteries, please be aware that the
battery life will normally shorten each time they are recharged.
Connecting the Power
The AC-33 can be operated using either an AC adaptor or batteries. Use the type of power that’s appropriate for your situation.
Caution regarding batteries
•Insert the batteries as directed, taking care to observe the correct polarity (+/- orientation).
•Do not mix new and used batteries, or batteries of dierent types.
•Carefully read and observe the cautions and handling instructions that accompany the batteries.
When using nickel-metal hydride batteries, you must use the charger that is specied by the battery manufacturer.
•Remove the batteries if you won’t be using the unit for several months.
•If any electrolyte leaks from a battery, use a dry cloth to carefully wipe o any electrolyte that might be on the battery case, and then install new
batteries. Battery electrolyte that contacts your skin may cause a rash. Battery electrolyte is hazardous to your eyes; if any electrolyte gets into
your eyes, ush them immediately with water.
•Do not carry or store batteries together with metallic objects such as pens, necklaces, or hairpins.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Roland AC-33 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Roland AC-33 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.
The manual is 74,37 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
