708862
2
Zoom out
Zoom in
Previous page
1/16
Next page
2
Turning the A-88MKII On
* Once everything is properly connected (p. 5), be sure to follow the
procedure below to turn on their power. If you turn on equipment in the wrong
order, you risk causing malfunction or equipment failure.
1.
Power-on your equipment in the order of A-88MKII 0
connected equipment.
2.
Power-on the connected equipment, and raise the volume
to an appropriate level.
* If the A-88MKII is not connected to a computer, it automatically powers-o four
hours after it was last played or operated (Auto O function).
If you do not want the power to be turned o automatically, disengage the
Auto O function.
5
To restore power, turn the power on again.
Turning O the Power
1.
Power-o your equipment in the order of connected
equipment
0
A-88MKII.
Making the Power Automatically Turn O
After a Time
(Auto O )
If the A-88MKII is not connected to a computer, it automatically
powers-o four hours after it was last played or operated (if the factory
settings have been unmodied). If you don’t want the unit to turn o
automatically, change the AUTO OFF” setting to “OFF” as described
below.
1.
Press the [FUNC] button.
2.
Press the keys that have “MISC” printed above them.
3.
Use the OCTAVE [-] [+] buttons to make the setting.
Parameter Button Explanation
MISC
OCTAVE [-]
OFF: The power will not turn o
automatically.
OCTAVE [+]
ON (default): If the A-88MKII is
not connected to a computer, it
automatically powers-o four hours
after it was last played or operated.
4.
Press the [NEXT] (ENTER) button.
Placing the A-88MKII on a Stand
If you want to place the A-88MKII on a stand, use the Roland KS-10Z or KS-12. Place the A-88MKII on the stand as follows.
Be sure to follow the instructions in the Owners Manual carefully when placing this unit on a stand. If it is not set up properly, you risk creating an
unstable situation which could lead to the unit falling or the stand toppling, and may result in injury.
* Be careful not to pinch your ngers when setting up the stand.
KS-10Z
Adjust the width of the stand so
that the rubber feet of the A-88MKII
straddle the stand.
Top view
Adjust so that the height does
not exceed 1 meter.
Align the front of the A-88MKII
with the front of the stand.
KS-12
Adjust the width of the stand
so that the rubber feet on the
keyboard side of the bottom of
the keyboard t into the holes
provided for the rubber.
Top view
Introduction
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland A-88MKII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland A-88MKII in the language / languages: English as an attachment in your email.

The manual is 5,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland A-88MKII

Roland A-88MKII Additional guide - English - 9 pages

Roland A-88MKII User Manual - German - 16 pages

Roland A-88MKII User Manual - Dutch - 16 pages

Roland A-88MKII User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info