527325
48
Zoom out
Zoom in
Previous page
1/64
Next page
48
If you experience problems, read this chapter rst. It contains tips for solving most problems. If
this chapter cannot help you solve a problem, please refer to the support section of our website. If
the problem is not resolved, refer to the contact information listed at the end of this manual.
Roland support website: http://www.roland.com/
Problems When Installing the Driver
Problem Conrmation Resolution
Installer does not
start
Are you attempting to install from a
networked DVD-ROM drive?
Put the CD-ROM to DVD-ROM drive connected to
your computer, and install.
Cannot install
Are you logged on with a user account
that does not have administrator
privileges?
Log on to the computer with a user account that
has administrator privileges.
For details, consult the administrator for your
computer system.
Windows XP
Is the “Driver Signing Options setting set
to [Block]?
Change the “Driver Signing Options setting (p. 52).
Are other programs or resident programs
(such as antivirus programs) running?
Be sure to exit all other programs before
installation.
Windows
Warning or error
appears during
installation
In the “Device Manager, do you see “Other
device, “Unknown device, or a device for
which “?, “!, or “x is displayed?
Reinstall the driver (p. 54).
Installer does not
exit
Is your computer running on battery
power?
Connect the power cord to the computer.
Other than a mouse and keyboard, are
any USB devices connected?
Make sure that there are no USB devices
connected to the computer (other than a mouse
and keyboard) during installation.
Is the unit connected to a USB hub that is
not connected to a power supply?
Use a USB hub that connects to a power supply.
Windows XP
“Found New
Hardware Wizard”
appears again
after driver was
installed
Did you connect the unit to a dierent
USB connector than the one you used
when installing the driver?
If you change the USB connector to which the unit
is connected, the “Found New Hardware Wizard”
may appear again even if the driver has already
been installed on the computer.
Follow step 10 of the driver installation procedure
(p. 19) and install the driver.
Windows 8/
Windows 7/
Windows Vista
Numeral such as
“2-” appears at
the beginning of a
device name
Did you connect the unit to a dierent
USB connector than the one you used
when installing the driver?
If you connect the unit to a dierent USB
connector than the one you used when installing
the driver, a numeral may appear with the device
name.
To have the device name appear without the
numeral, connect the unit to the same USB
connector used during installation, or reinstall the
driver (p. 54).
Troubleshooting
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland A-88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland A-88 in the language / languages: English as an attachment in your email.

The manual is 12,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland A-88

Roland A-88 User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info