481050
42
Zoom out
Zoom in
Previous page
1/96
Next page
42
Performing (Play Mode)
Here’s how to specify the current channel on which performance data from the keyboard will be transmitted.
Here’s how to change the current channel (MIDI transmit channel).
1 Use the [ ] or [ ] button to move the cursor in the display to
“MIDI CH.”
The display will indicate the current channel.
2 Use the [VALUE] knob to specify the desired channel number.
You have now specified the current channel.
Specifying the Current Channel (MIDI Transmit Channel)
MIDI Channel
What is the current channel?
The current channel is the MIDI transmit select for the keyboard and bender lever.
* Each controller can have its own separate transmit channel. However if “OMNI” is
ON, messages will be transmitted on the current channel specified for OMNI.
Here’s another way to change the current channel.
1. Hold down the [SHIFT] button and use the following buttons to enter a
numerical value.
fig.numberbutton_play.eps
Controllers [B1]–[B4], [SPLIT]/[DUAL]/
[LOWER]/[UPPER] buttons, OCTAVE [–] [+]
buttons
2. Press the [ENTER] button.
With this, the numerical value you entered
is confirmed.
What is OMNI?
If you turn OMNI on, all controllers will transmit on the current channel regardless of
their assigned MIDI transmit channel. If you want the MIDI transmit channel of the
controllers to also change when you switch the current channel, turn OMNI on as
follows.
1. Press the [ACT] button and [] button simultaneously to enter Edit
mode.
The display will indicate “LCD CONTRAST.”
2. Turn the [VALUE] knob until “SYSTEM SETTING” appears in the display.
Press the [ENTER] button.
3. Turn the [VALUE] knob until “OMNI” appears in the display.
Press the [ENTER] button.
fig.lcd-omnisw.eps
4. The display will show the current setting.
5. Use the [VALUE] knob to select “ON” or “OFF.”
6. Press the [ENTER] button.
You’ll be returned to Play mode.
Item Explanation
OMNI OFF
Messages will be transmitted using the channel and port assigned for each
controller.
OMNI ON
Messages will be transmitted using the current channel and the KEYBOARD
PORT, regardless of the channel and port assigned for each controller.
A-300_500_800C_e.book 42 ページ 2014年8月19日 火曜日 午後3時27分
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roland A-800PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roland A-800PRO in the language / languages: English as an attachment in your email.

The manual is 15,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roland A-800PRO

Roland A-800PRO User Manual - German - 96 pages

Roland A-800PRO User Manual - Dutch - 92 pages

Roland A-800PRO User Manual - French - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info