160658
26
Zoom out
Zoom in
Previous page
1/40
Next page
48
49
SECTION 10: OPTIONS FOR SYSTEM CONFIGURATION
If you need to change your network settings or other system-level options, go to any Home
Menu and select “Change Library or Configuration”. Choose “System Configuration” at the
bottom of the next screen. You will see the following options:
Software Version & Updates: This option shows you which software version you have on
SoundBridge and allows you to check if a newer version is available for download. SoundBridge
will notify you automatically when a new software update is available after coming out of
Standby mode or after accessing your “source” menu. Use this option to check for new software
manually.
Select Wi-Fi SSID & Password:
This option allows you to check the name of the wireless
network to which you are connected and select another one. Use this option to enter your
network security key. See Appendix section “Wi-Fi Setup” for more information.
Show Wired Ethernet Status: This option displays your connectivity status, IP address and
MAC address, among others.
Show Wi-Fi Status: Displays Wi-Fi signal strength.
Network Control: Enables or disables control of SoundBridge by a remote UPnP device.
Reset to Factory Defaults: Reset to original factory settings. Important: This will erase all
Presets, Internet Radio favorites, network settings, and any other customizations made via the
Settings menu or web page.
Restart SoundBridge: Power cycles SoundBridge and reboots the system.
Safe Mode
Safe Mode runs automatically in the unlikely event that Soundbridge software becomes
corrupted. While in Safe Mode you can download a new version of software from Roku or
restore factory settings. When Soundbridge enters Safe Mode, you will see the text “Safe
Mode” displayed superimposed over the Roku logo during the startup animation.
Safe Mode can also be entered manually by powering Soundbridge off by unplugging it from
power, then plugging it in again while pressing and holding any button on the remote control
during boot-up.
While in Safe Mode, your stored settings will not be recalled. Therefore, you will be prompted
to enter your language and Wi-Fi region again. If you need to update the software on your
SoundBridge, you will also need to select a network and enter the WEP key (if needed) or use
SD card mode.
In Safe Mode, SoundBridge goes directly into the System Configuration menu, with options
limited to checking for software update and resetting factory defaults. The Roku logo is
displayed next to the menu with “Safe Mode” superimposed on it, like the startup animation.
Roku Control Protocol (RCP)
SoundBridge supports a sophisticated control protocol called the Roku Control Protocol (RCP).
Look for third party applications that run on your PC, Mac, or PDA that allow remote Wi-Fi
control of your SoundBridge using RCP. If you are a developer, see the Community tab on our
web site for more information. There, you can find links to third-party software and discussion
of controlling SoundBridge in our user Forums (look for the Control Forum.) A link to the
forums can be found in the support tab on our web site.
Geeks — Read This
The SoundBridge has a command line interface that you can “telnet” to for piddling about.
You will need to telnet to port 4444. You can quickly get to a Telnet prompt by going to the
built-in web page’s “Status” tab and clicking on the SoundBridge’s IP address. Type “?” at the
command prompt to see a list of commands. See the developer section of our web site for
more details, including the RCP remote control protocol.
SoundBridge has a built-in UPnP AV “media renderer.” This protocol can be used to control the
SoundBridge from your own software. Please watch the developer section of our web site for
updates on this feature.
Section 10: Options For System Configuration
10
Section 10: Options For System Configuration
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roku soundbridge m1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roku soundbridge m1001 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roku soundbridge m1001

Roku soundbridge m1001 Additional guide - English - 14 pages

Roku soundbridge m1001 Additional guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info