490134

Roku SoundBridge Radio Wi-Fi Manual

67
Zoom out
Zoom in
Previous page
1/88
Next page
65
Steps for using Windows Connect Now
SoundBridge Radio works with Windows Connect Now which acts as a wireless network setup
wizard to detect your network passwords and configure SoundBridge Radio to accept them.
Follow these steps to use Windows Connect Now:
1. Connect a card reader to your computer and insert an SD or MMC card. The drive letter of
the card should be noted (this can be found in My Computer).
2. Run the ‘Wireless Network Setup Wizard’ from the XP control panel and follow the
instructions. A number of files will be written to the SD or MMC card attached to the
computer via the card reader. Be sure to choose the driver letter as noted above.
3. Take the SD or MMC card out of the reader and plug that card into SoundBridge Radio.
4. Use the SoundBridge Radio remote control to scroll down to ‘Select Wi-Fi SSID and
Password’ and press Select. This detects the files on the SD card and uses the information to
configure the SSID and password.
5. Restart SoundBridge Radio.
Note: Because SoundBridge Radio doesn’t write anything back to the SD/MMC card you won’t
see SoundBridge Radio show up in the final network list if you have followed the ‘Wireless
Network Setup Wizard’. You may have to click ‘Cancel’ on the ‘Wireless Network Setup Wizard’
because the computer expects the card to be reinserted after setup of network devices is
complete.
Multiple Wi-Fi Networks
If SoundBridge Radio detects more than one Wi-Fi network, you will be asked to select which
SSID (network name) you want to use. You will only be asked to select an SSID if you have more
than one wireless network at your location. If you have more that one network, scroll down to
select from the Wi-Fi networks you have and press Select [ ].
You can also enter the name of a Wi-Fi network. To enter a network name, follow these steps:
1. From “Select Wi-Fi SSID and Password,” select “Specify a wireless network” and press
Select [ ].
Section 13: Appendices
11
13
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roku SoundBridge Radio Wi-Fi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roku SoundBridge Radio Wi-Fi in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info