68388
12
Zoom out
Zoom in
Previous page
1/20
Next page
– 12 –
– 12 –
2. INPUTS - OUTPUTS - CONTROLS
1 “+12V” POWER INPUT TERMINAL
Power input terminal to connect the active sub to the positive +12V power wire connected
to the car battery.
2 “REMOTE” INPUT TERMINAL
Terminal to connect the active sub to the amp (remote) turn-on / turn-off lead of the
head unit.
3 “GND” POWER INPUT TERMINAL
Power input terminal to connect the amplifier to the negative or ground wire connected
to the chassis of the vehicle
4 FUSE HOLDER
Fuse holder equipped with a 30A ATC fuse, to protect the internal amp electronics of the
active sub.
5 HIGH LEVEL INPUT
Port to connect the high level input adapter to headunits that only offer loudspeaker
outputs, but no RCA line-level outputs.
6 RCA LINE LEVEL INPUT
RCA input to connect the active sub to the line-out of the head-unit (sub-out).
7 AUTO-SENSE SWITCH
If your headunit does not have a "REM" output, you can automatically turn on/off
the amp-modul with the signal of the "HIGH LEVEL" input. Therefore please set the
"SWITCH" to ”ON”.
8 PHASE SHIFT CONTROL
Phase control potentiometer for the relative phase adjustment of the active sub, to match
the acoustical phase of the bass output with other speakers installed in the vehicle.
9 BASS BOOST CONTROL
"BASS BOOST" control potentiometer to add more output in the 60Hz region.
10 CROSSOVER FREQUENCY CONTROL
Crossover control potentiometer to adjust the lowpass frequency of the electronic
crossover with 12dB/oct. between 80 to 200Hz.
11 INPUT GAIN CONTROL
Input level gain control potentiometer, allowing to match the output voltage of the head-
unit’s RCA line-outs to the amp-module input of the active sub.
12 POWER / PROTECTION LED
Blue LED signalling correct operation of the amp module, red (“protection”) LED,
signaling general malfunction of the amp-module, i.e. overheating, shortcut a.s.o.
13 HIGH LEVEL PLUG
Plug to connect the loudspeaker outputs of a headunit to the amp module, if the headunit
has no dedicated RCA Line-outs.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rodek RN110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rodek RN110 in the language / languages: English, German as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info