Manual Rockford Fosgate T 162 S (page 6 of 44) (English, German, French, Italian, Spanish)

66682

Zoom out

Zoom in

1/44

INSTALLA

TION

Wiring Tweeter to Crossover

1. Use illustrations for proper connection.

2. Be sure to maintain speaker polarity

Setting Crossover

A 0dB Tweeter Level matches the amplitude of the tweeter to the speaker

B -3dB Tweeter Level reduces the amplitude of the tweeter -3dB lower than the midrange. (ex. ideal for

tweeters located high in door panels and midranges located low in the kick panel)

C Replaceable Tweeter Protection Bulb acts as a fuse to protect against overload. If the bulb burns out,

remove the burned out bulb and insert a new bulb (12 volt, 10 watts) into the retainer clips.

D Bi-Amping –The Power components have the ability run separate channels of amplification to the

tweeter and speaker on the same crossover.This can be done to allow for more control of the output of

each individual speaker.

NOTE:When NOT bi-amping the crossover, connect to the W inputs only.The jumpers must be in the

"Normal" position.

To Bi-amp

1. Make sure the system is off.

2. Connect the speaker outputs from the amplifier that will drive the speaker to the W inputs on the

crossover.Then connect the speaker outputs from the amplifier that will drive the tweeter to the

T inputs on the crossover.

3. Move the jumpers from the “Normal” position to the “Bi Amp” position.

View from bottom of crossover

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rockford Fosgate T 162 S in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rockford Fosgate T 162 S Manual

Product: