602259
27
Zoom out
Zoom in
Previous page
1/52
Next page
7
INSTALACIÓN
7. Monte el amplificador seguramente al vehículo o al soporte del amplificador. Tenga cuidado de no montar el amplificador
sobre paneles de cartón o plástico porque los tornillos pueden salirse del panel debido a la vibracn o las frenadas
repentinas del vehículo.
8. Conecte desde la señal de origen enchufando los cables RCA en los conectores del arnés de entrada RCA/altavoz,
luego inserte el conector Molex de cuatro clavijas en el conector de ENTRADA complementario en el amplificador.
NOTA:Cuando la instalación exige una entrada de alto nivel (altavoz), se deberá cortar el ars
RCA/Altavoz en el lado del cable del altavoz del divisor "y". Luego conecte el cable de
los cables correspondientes del vehículo.
PRECAUCN: Aserese siempre de que la alimentación esté apagada o desconectada en el
amplificador antes de conectar los cables RCA. No hacerlo podría causar lesiones,
dos al amplificador o a los componentes conectados.
9. Conecte los altavoces. Pele 1/2 pulg. el aislamiento de los cables del altavoz y conecte al arnés de cables del altavoz, luego
inserte el conector Molex de cuatro contactos en el conector de cuatro contactos correspondiente del ALTAVOZ en el
amplificador. Aserese de mantener la polaridad correcta de los altavoces. NO conecte a tierra ninguno de los
conductores de los altavoces pues se poda causar un funcionamiento inestable.
NOTA:4ohm carga por canal - SOLAMENTE.
10. Realice un control final del cableado terminado del sistema para asegurarse de que todas las conexiones son precisas.
Verifique que no haya cables pelados ni conexiones sueltas en ninguna de las conexiones de poder y a tierra que podan
causar problemas. Instale el fusible cerca de la conexión de la batea.
NOTA:Para establecer la polaridad de señal correcta siga los diagramas.
From
Source Unit
Power
Connection
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rockford Fosgate PBR300X4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rockford Fosgate PBR300X4 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info