NOTE: Remove all speaker leads from all the amplifier(s) to ensure the speakers are not damaged during setup. An equivalent resistive load can be used
on each channel as you are measuring for clipping for increased accuracy. If no resistive load is available the measurement can be taken across
the open channels.
Main Input Setup
Using the test tones at various gain overlap levels provided on the 3Sixty.3 setup disk, level set all your amplifier(s) channels per your amplifier
manufactures instructions. (Generally -5dB of Gain Overlap is used for SQ type systems and -10dB for SPL type systems)
BT Input Setup
1. Copy the same test tones using the same gain overlap from the 3Sixty.3 setup disc, to your BT device.
2. Open the “Wired Remote Control (WRC) simulator at the top of the page. Connect your BT device (When switching the source to Bluetooth, audio must
be streaming from your device before selecting the Bluetooth as the source. Select BT for the source from the “Source” drop down menu and close the
simulator page.
3. Select the correct test tone from your BT device for the first channel you are going to level set and turn the volume to the devices maximum unclipped
level.
4. On the main UI page slowly decrease the “Level” until an unclipped output is obtained. Repeat for all the remaining channels. You should not have to
adjust the gains at the amplifier.
AUX Input Setup
1. Copy the same test tones using the same gain overlap from the 3Sixty.3 setup disc, to your AUX device.
2. Open the “Wired Remote Control (WRC) simulator at the top of the page. Select AUX for the source from the “Source” drop down menu and close the
simulator page.
3. Select the correct test tone from your AUX device for the first channel you are going to level set and turn the volume to the devices maximum unclipped
level.
4. On the main UI page slowly decrease the “Level” until an unclipped output is obtained. Repeat for all the remaining channels. You should not have to
adjust the gains at the amplifier.
Optical Input Setup
1. Copy the same test tones using the same gain overlap from the 3Sixty.3 setup disc, to your optical output equipped device.
2. Open the “Wired Remote Control (WRC) simulator at the top of the page. Select Optical for the source from the “Source” drop down menu and close the
simulator page.
3. Select the correct test tone from your Optical device for the first channel you are going to level set and turn the volume to the devices maximum
unclipped level.
4. On the main UI page slowly decrease the “Level” until an unclipped output is obtained. Repeat for all the remaining channels. You should not have to
adjust the gains at the amplifier.
5. Open the “Wired Remote Control (WRC) simulator at the top of the page. Select Main for the source from the “Source” drop down menu and close the
simulator page before continuing on with the delay.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Rockford Fosgate 3 SIXTY.3 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Rockford Fosgate 3 SIXTY.3 in the language / languages: English as an attachment in your email.
The manual is 6,77 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
