739023
27
Zoom out
Zoom in
Previous page
1/35
Next page
Error
Solution
Error 1: Rotate the laser head to check that it turns freely.
The LDS unit is jammed. Remove any items blocking it then move the
robot to a new location and restart.
Error 8: Clear away any obstacles around the robot. The robot may be stuck. Clear any obstacles around it.
Error 2: Clean and lightly tap the bumper.
The bumper is stuck. Tap the bumper repeatedly to dislodge any
jammed items. If nothing falls out, move the robot to a new location and restart.
Error 3: Move the robot to a new location and restart. A wheel is suspended. Move the robot to a new location and restart it.
Error 4: Wipe the cliff sensors, move the robot away from raised edges, and restart.
Error 5: Remove the main brush and clean the brush and bearing. The main brush may be tangled up. Remove and clean it.
Error 6: Remove and clean the side brush. The side brush may be tangled up. Remove and clean it.
Error 7: Look for anything stuck in the main wheelsthen move the robot to a new
location and restart.
Error 9: Install the dust bin and filter.
The main wheels may be jammed. Remove and clean them.
Error 10: Make sure that the filter is dry or clean the filter.
Troubleshooting
󼵡

The robot is suspended. Move it to a new location and restart. If the problem
persists, clean the cliff sensors. This error may also be caused by a dirty cliff
sensor. Try wiping all sensors clean.
Reinstall the dustbin and filter and check that they are correctly installed. If the
problem persists, try replacing the filter.
The filter is not completely dry. Dry the filter for at least 24 hours. The filter may
also be blocked and require cleaning. If the problem persists, replace the filter.
󽶴󽶷
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roborock S6 Pure at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roborock S6 Pure in the language / languages: English as an attachment in your email.

The manual is 6,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roborock S6 Pure

Roborock S6 Pure User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info