739029
21
Zoom out
Zoom in
Previous page
1/28
Next page
Troubleshooting
19
Fault display
Error 8: Please clear obstacles around the machine
When a runtime error occurs, the power indicator flashes in red quickly and a voice prompt is given.
Use the table below to solve the problem.
Solution
The machine may get stuck or caught on objects. Please clear obstacles
around the machine;
Error 2: Please clean and lightly tap the bumper
The bumper is stuck. Please lightly and repeatedly tap the bumper to
remove any foreign matter. If no foreign matter is found, please move
the machine to a new location and start it;
Error 3: Please move the machine to a place near
its original location and start it
The wheels are suspended. Please move the machine to a place near its
original location;
Error 4: Please wipe the cliff sensor and move the
machine to a place near its original location and
start it
The machine is suspended. Please move it to a place near its original
location and start it. This problem may also be caused when the cliff
sensor is too dirty. Please wipe the cliff sensor to eliminate this problem;
Error 5: Please remove the main brush to clean the
brush and bearing
The main brush may be entangled with foreign matter. Please remove
the main brush and its bearing for cleaning;
Error 6: Please remove and clean the side brush
The side brush may be entangled with foreign matter. Please remove
and clean the side brush;
Error 7: Main wheel exception
Please check whether the main wheel is entangled with foreign matter
or move the machine to a place near its original location and start it;
Error 9: Please reinstall the dust bin and filter
Please reinstall the dust bin and filter and check that they are installed
in place. If the problem persists, please try replacing the filter;
Error 10: Please check that the filter is dry or clean
the filter
The filter is not completely dry. Please leave it to dry for at least 24 hours.
The filter may be blocked. Please clean it.If the problem persists, please
replace the filter;
Error 11: A high-intensity magnetic field is detected.
Please keep far away from the virtual wall before
starting
The machine is too close to the virtual wall when starting up.
Please move it to a new location and start it;
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roborock E3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roborock E3 in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Roborock E3

Roborock E3 User Manual - German - 4 pages

Roborock E3 User Manual - French - 4 pages

Roborock E3 User Manual - Italian - 4 pages

Roborock E3 User Manual - Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info