512484
18
Zoom out
Zoom in
Previous page
1/268
Next page
DE
18
The Fence should
be inside lawn
Leave 30cm (12 inches) at the
starting point, where the Base
Station is located
Direction of wire layout
from the Base Station
Perimeter Wire
do not remove the
plastic covering
The Fence should
be inside lawn
Leave 30cm (12 inches) at the
starting point, where the Base
Station is located
Direction of wire layout
from the Base Station
Perimeter Wire
do not remove the
plastic covering
1.4.2 Auslegen des Begrenzungsdrahtes
Starten Sie die Installation, indem Sie alle paar Meter einen Rasennagel einschlagen.
Richtungsänderungen nehmen Sie nach Plan mit einem Nagel vor. Vergessen Sie nicht,
Hindernisse nach Bedarf mit Draht auszugrenzen.
Nachdem Sie genug Draht entlang der Zone verlegt haben, benutzen Sie den mitgelieferten
RoboRuler, um genau entlang der Kante und und um Hindernisse zu verlegen. Er ist praktisch, um
den Draht genau entlang von Mauern, Zäunen, Gehwegen, Blumenbeeten und anderen Bereichen
verlegen zu können.
Sie finden zwei Basismaße am RoboRuler vor (Bild 1.13):
- die kurze Distanz wird verwendet, wenn die Bereiche neben der Fläche eben und frei von
Hindernissen sind und der Mäher überhängend mähen kann (z.B. Gehwege, Blumenbeete).
- die lange Distanz wird an den Teilen der Kante verwendet, an denen sich Hindernisse befinden
oder die einen Höhenunterschied zur Fläche aufweisen (z.B. Mauern und Zäune).
Bild 1.12 –
Richtung der Drahtverlegung
nach der Ladestation.
Begrenzungsdraht –
Entfernen Sie nicht
die Plastikabdeckung
Lassen Sie 30cm Kabel am
Startpunkt übrig, wo die
Ladestation platziert werden soll
Richtung der Kabelverlegung
von der Ladestation aus
Der Zaun sollte auf der
Innenseite des Rasens sein
Langes Maß des
RoboRuler – wenn die
Rasenkante an einem
Hindernis oder einem
Höhenunterschied (Stufe)
endet.
Kurzes Maß des
RoboRuler - wenn der
Boden nach der
Rasenkante eben verläuft
und frei von jeglichen
Hindernissen ist.
Bild 1.13 –
Verwenden des RoboRuler
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow Tuscania 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow Tuscania 500 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 9,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info