644648
13
Zoom out
Zoom in
Previous page
1/52
Next page
13
EN
There are two options to set the Base Station:
3.2.2 Internal Setup (on the lawn perimeter)
Choose a place along the Perimeter Wire where
you want to place the Base Station, based on the
inputs given in paragraph 3.2.1.
Place the Base Station in the direction shown in
the gure to the right.
3.2.3 External Setup (off the lawn perimeter):
There are two types of External Setup:
A.
At a corner
In this type of setup, the Base Station is located at one
of the corners of the lawn, as shown in the gure at
the right.
Choose a corner where you want to place the Base
Station outside of the lawn area.
Place the Base Station, where its front side is touching
the lawn edge or placed somewhat on the lawn.
Continue to lay the perimeter wire as shown in the
gure to the right, where it continues at least 10cm
(4”) beyond the Base Station and turns back towards
the lawn at a distance of 10cm (4”) from the other
wire.
The Base Station may be placed in a small shift to the
right in order to allow smooth entry of the mower to
the Base Station.
You will have the opportunity to later adjust the Base
Station position to conrm smooth entry.
B.
Outside the lawn
(Can be set only through the Robomow App for
specic models)
• Choose a place outside the lawn where you want
Robomow to dock and charge.
• Conrm the path between the lawn and the outside
area is smooth with no height difference, so
Robomow will not get stuck and will follow the wire
smoothly.
• The surface between the lawn and the Base Station
should be hard (such as a sidewalk or rigid ground)
and not sandy or stony, so Robomow will not slip or
get stuck on it.
• The area between the lawn and the Base Station
should be clear of obstacles and objects.
• Lay the wire as shown in the gure to the right:
- Narrow path of 50cm (20”) width.
- Square Perimeter Island of 30cm (12”) edges.
- Island starts 50cm from the Perimeter Wire.
- Keep a distance of 10cm (4”) between Perimeter
Wire and the Island from both sides.
- The front of the Base Station should be placed a
minimum distance of 1.5m (5 ft.) from the Perimeter
Wire and NOT more than 4m (13 ft.).
10cm (4”)
Min. 10cm (4”)
Main Zone
10cm (4”)
Min. 1.5m (5ft) – Max 4m (13ft)
Perimeter Island
30 cm
10cm (4”)
50 cm (20”)
50 cm (20”)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow TC1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow TC1000 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow TC1000

Robomow TC1000 Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info