724739
57
Zoom out
Zoom in
Previous page
1/64
Next page
54 55
Frequently Asked
Questions
Mower does not dock properly and sometimes misses Base
Station’s contacts
The entrance to the Base Station is not flat. Fill some ground
to flatten the lawn around the Base Station to allow smooth
entrance. Make sure the Perimeter Wire is laid according to the
installation instructions on the supplied installation template.
Make sure that the Base Station is placed on a relatively level
ground.
Poor mowing quality
The blade may be dull. Remove the Disabling Device. Put on
heavy-duty gloves and inspect the blade. Replace if needed.
Avoid mowing wet grass. For the best cut, operate your mower
when the grass is dry. It is recommended not to mow in the
early morning hours.
Patchy and uneven mowing
Current mowing times are not enough. Increase the time your
mower runs on the lawn. Define additional starting points (not
applicable to models for lawns under 200 m
2
/ 2150 ft
2
) for a
more uniform coverage.
Mower does not depart from base for a long time (not
applicable to models for lawns under 200 m
2
/ 2150 ft
2
)
Use the mobile app to understand the reason for the non-
departure.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RX20u - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RX20u - 2020 in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RX20u - 2020

Robomow RX20u - 2020 User Manual - German - 64 pages

Robomow RX20u - 2020 User Manual - Dutch - 64 pages

Robomow RX20u - 2020 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info