512483
27
Zoom out
Zoom in
Previous page
1/54
Next page
17
Preparing Robomow
EN
If you wish to quit the process during setup:
3.3.1 Select Language:
3.3.2 Set Date:
3.3.3 Set Time:
3.3.4 Test Base Station Position
Press to start the test.
Robomow drives towards the Base Station and
Searching Base is displayed.
If the mower does not start the test, then one of the
following messages will be displayed:
No Wire Signal – Confirm that the Power Box is connected
to the plug socket and that the extension cable is
connected at its both sides: to the Power Box and to the
Base Station.
Change wires in plot connector – The Perimeter Wire
has been connected in the opposite direction. Swap the
wires at the plot connector.
3.3.5 Peg Base
Insert the remaining
4 Stakes of the Base Station,
to secure it to the ground.
Robomow enters to the Base Station, drives back, waits in front of
the Base Station and Peg Base is displayed.
If a Reposition Base Station message is displayed:
o Slightly move the Base Station to align it with the
Perimeter Wire.
o Check for any obstacles that may interfere with the
mower’s entrance to the Base Station.
Stakes x 4
Scroll to select a value hh:mm.
Press
to set a value.
Press
S T O P
to proceed
Scroll to select
mark.
Scroll to select a language. Press
.
Scroll to select a value dd/mm/yy.
Press
to set a value.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RS630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RS630 in the language / languages: English as an attachment in your email.

The manual is 7,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RS630

Robomow RS630 User Manual - German - 54 pages

Robomow RS630 User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info