512483
20
Zoom out
Zoom in
Previous page
1/54
Next page
10
Robomow RS models
Lay the Template on the ground at the entrance to the Narrow
Pass:
The
arrow points towards the entrance to the
Narrow Pass, in the direction of the Sub-Zone.
Insert by hand (half-way in) 7 pegs into the 7 holes
numbered
1
7
.
Lift the Template up so the pegs are left loosely stuck in the
ground.
Lay the Perimeter Wire through the four right-side pegs numbered
1
4
Hold the wire around each peg
1
,
2
,
3
,
4
while
driving the peg all the way into the ground.
Leave pegs 5 – 7 standing half-way out. They will be
connected to the wire later.
Continue laying the Perimeter Wire through the pass towards
the Sub-Zone:
Straight line at a minimum distance of 45 cm (1.5 ft.) from
the pass right side edge.
Pause at the end of the Pass in order to set the other end
of the Narrow Pass.
There should be a 40 cm (1.3 ft.) distance between the Sub-
Zone Perimeter Wire and the pass exit.
Turn the Template and lay it on the ground at the entrance to
the Sub-Zone:
The
arrow points towards the Sub-Zone.
Insert by hand (half-way in) 7 pegs into the 7 holes
numbered 1 – 7.
Lift the Template up so the pegs are left loosely stuck in the
ground.
Lay the Perimeter Wire through the three right side pegs
numbered 1 – 3
Hold the wire around each peg 1, 2, 3 while driving the
peg all the way into the ground.
B
1
START
END
2
4
1
3
5
6
7
2
4
1
3
5
6
7
B
1
START
END
2
4
1
3
5
6
7
2
4
1
3
5
6
7
1
B
1
B
1
END
START
2
4
1
3
5
6
7
2
4
1
3
5
6
7
1
B
1
Lay the Template
Turn the Template and lay it on the ground
Insert
1
7
pegs
Insert 1 – 7
pegs
Lay Perimeter Wire
through
1
4
pegs
Lay Perimeter Wire through
1 – 3
pegs
Starting the Sub-Zone Passage setup
Main Zone
Main Zone
Main Zone
Main Zone
Main Zone
Sub-Zone
Sub-Zone
Sub-Zone
Sub-Zone
Sub-Zone
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RS630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RS630 in the language / languages: English as an attachment in your email.

The manual is 7,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RS630

Robomow RS630 User Manual - German - 54 pages

Robomow RS630 User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info