537227
12
Zoom out
Zoom in
Previous page
1/54
Next page
2
Robomow RS models
If your lawn does not match this description, read the next
Sections to find the style of your lawn.
If your lawn is “Main Zone Only”, you can skip to
Section 1.4 of this chapter to determine Base Station
location.
1.2.2 Main Zone + Sub-Zone(s) Type Lawn
This type of lawn consists of more than one zone and these
zones are connected by a pass. The pass may be relatively
narrow, but it is wide enough for Robomow to drive through.
In this type of lawns, Robomow will be able to drive itself from
one zone to the other in order to mow the whole area.
If you answer “yes” to all of the following questions, your lawn is a “Main
Zone + Sub-Zone(s)” type lawn:
Is your grass area one continuous area?
Are parts of your lawn separated from the Main Zone?
Is there a Narrow Pass that is wide enough for Robomow to drive
through between these zones: 1.2 – 5 meters (4 – 16 ft.)?
Is this Narrow Pass firm, level and smooth (not stony, sandy or
elevated)?
For example: grass area, sidewalk, firm path, solid ground.
Such additional areas are called Sub-Zones.
You will instruct Robomow to drive through the Narrow Pass in order to
get to a Sub-Zone. It will mow both the Main Zone and its Sub-Zone(s)
one zone at a time.
If your lawn does not match this description, skip to the next
Section 1.3 of this chapter: “Separate Zones”
.
In order to make sure Robomow drive into the Sub-Zone and back, we
have to further examine the lawn area:
What is the width of the Narrow Pass?
If the pass is 1.2 – 2 m (4 to 6.5 ft.)
wide…
If the pass is 2 – 5 m
(6.5 to 16 ft.) wide…
During Perimeter Wire setting:
You will use a simple Template
supplied with your Robomow.
This will guide the Perimeter
Wire through the pass area.
(See Section 2.2.2 page 9).
During One-Time Setup:
You will set Robomow to work in
a Sub-Zone mode.
(See page 23).
During Perimeter Wire
setting:
You will set the Perimeter
Wire as in a regular Main
Zone type lawn. Robomow
can navigate through the
pass without special wire
settings.
During One-Time Setup:
You will set Robomow to
work in a Sub-Zone mode.
(See page 23).
Main + Sub-Zone with a Narrow Pass
Main Zone
Main Zone
Sub-Zone
Narrow Pass
Main Zone
Main Zone
Main Zone
Main Zone
2 – 5 m (6.5 to 16 ft.)
1.2 – 2 m (4 to 6.5 ft.)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RS612 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RS612 in the language / languages: English as an attachment in your email.

The manual is 7,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RS612

Robomow RS612 User Manual - German - 54 pages

Robomow RS612 User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info