512472
33
Zoom out
Zoom in
Previous page
1/60
Next page
33
Shortcut buttons
To display the program, press the
‘UP’ arrow while Robomow is in the Base Station.
The program is displayed for 10 seconds before changing back to the main display.
To update the program, press the
‘GO’ button within the 10 seconds that the program is
displayed.
The following characters may appear under each of the active days:
Character Meaning
+ Active day
B
Skipped due to low battery voltage;
(Robomow did not depart from the Base Station at the scheduled time due to
low battery voltage)
b
Docked before time due to low battery voltage;
(Robomow did not complete the operation and drove back to the Base Station
due to low battery voltage – relevant only when
‘Work time’ different from
‘Max’ is set)
d
Robomow did not return to the Base Station because of Drive over current
('Start elsewhere') or 'Drive problem'; Robomow returned to the Base Station
before time due to drive overheat.
M
Skipped due to mow over current detected in the Base Station before
Robomow has started the operation.
m
Robomow returned to the Base Station before time due to mow problem (over
current or over heat)
O
Skipped because the mower was out of the Base Station at the scheduled start
time
P Skipped due to power problem (there is no charging voltage at departure time)
R
Skipped due to rain;
(Robomow did not depart from the Base Station at the scheduled time due to
rain detection)
r
Docked before time due to rain;
(Robomow did not complete the operation and drove back to the Base Station
due to rain detection during the operation)
S
Skipped due to signal problem (it may happened because of problem with wire
sensors, cut perimeter wire, poor splicing of perimeter wire or perimeter wire
which was too long).
s Robomow returned to the base because of no signal for more than 1 hr
U
Skipped due to user choice/interference (usually
‘skip next start’ or when the
Program’ set to ‘off’)
u
Robomow did not return automatically to the Base Station because of user
interference
How to cancel an active day
?
In weekly program set by days, simply change the ‘+’ to ‘-‘ in the main display of the days; in
the
Advanced weekly program, choose the None’ option under weekly program menu in
the ‘
Mode’ display.
2.1.1.2 Entry points
Entry points’ are defined as the points, where the mower leaves the Edge and turns into the lawn
to mow the inner area. The default of the
‘Entry points’ is set to ‘off’ in the factory; it means that
all operations of the inner area will start from the Base Station.
The
‘Entry points’ menu consists of two options (figure 2.8):
Set entry points
– Allows setting up to four different entry points to your lawn in addition to the Base
Station, which is defined as an entry point by default. It is recommended to
‘Set entry points’
where there are narrow passes in order to insure the mower will cover all areas effectively.
To set the entry points, choose this option when the mower is in the Base Station; Robomow will
start to follow the perimeter wire; follow the mower and press
‘GO’ at the point you want to set;
press
‘GO’ for other points or press ‘STOP’ to end the process.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RM510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RM510 in the language / languages: English as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RM510

Robomow RM510 User Manual - German - 60 pages

Robomow RM510 User Manual - Dutch - 60 pages

Robomow RM510 User Manual - French - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info