512472
27
Zoom out
Zoom in
Previous page
1/60
Next page
27
Neem de perimeterschakelaar en knijp in beide tappen (zoals in
figuur 1.42a wordt weergegeven) zodat het deksel van de
achterkant van de perimeterschakelaar verwijderd kan worden.
Verbind de voedingskabel aan het perimeterschakelaarbord (zie
figuur 1.42b) en zet de perimeterschakelaar weer in elkaar.
Verbind de voeding met een gewoon stopcontact van 230 Volt
De voeding is alleen maar geschikt voor gebruik binnenshuis, plaats
deze dus in een goed geventileerde, droge omgeving (bedek ze niet met
een plastic zak).
Druk de ‘ON’ toets in. Een klein knipperend groen lampje bij de ‘ON’ toets geeft aan dat het
systeem actief is en goed werkt. De perimeterschakelaar heeft ook verklikkers voor een
losgeraakte/gebroken perimeterdraad en voor een slechte verbinding.
De perimeterschakelaar schakelt zichzelf automatisch uit, zodat u hem na elk gebruik niet zelf
hoeft uit te schakelen. 12 uur na gebruik zal hij zichzelf uitschakelen. U kan hem ook handmatig
uitschakelen door de ‘ON’ toets gedurende 3 seconden in te drukken. Na de drie seconden hoort
u een toon. Dat is het teken dat u de knop mag loslaten en de schakelaar is niet meer actief.Test
de perimeterdraad installatie door het menu ‘Draadpositie’ te kiezen zoals getoond in figuur
1.44. Robomow
®
zal de draad volgen terwijl de maaimotor uitgeschakeld is om te vermijden dat
de draad zou beschadigd worden na de initiële installatie; Loop mee met Robomow
®
terwijl hij de
rand volgt tot hij de volledige perimeterdraad gevolgd is zonder iets te raken; indien Robomow
®
een obstakel raakt stopt hij en rijdt achteruit zodat u draadpositie kan aanpassen.
Figuur 1.43
Perimeterschakelaar
Dashboard.
Knipperend lampje: het
systeem is actief
Een draadverbinding is niet goed of
de perimeterdraad is te lang
Geeft aan dat een draad
losgekoppeld of gebroken is
ON toets
Figuur 1.44
De positie van de
perimeterdraad testen
Wire position
Press GO to test
Zones setup
Press GO
Hoofdscherm –
Druk ‘GO
Settings
Press GO
Druk ‘GO
Maai zone: Basis
Druk GO
Druk ‘GO’ en volg
Robomow terwijl hij de
perimeterdraad volgt
Kinderslot
Druk GO
Draadpositie
Druk GO
Scroll neer tot u
‘Instellingen’ ziet
Scroll op tot u
‘Draadpositie’ ziet
Druk ‘GO
Wire position
Press GO to test
Draad positie
Druk GO om te testen
Zones setup
Press GO
Zones setup
Press GO
Zones instellen
Druk GO
Instellingen
Druk GO
Figuur 1.42A
Figuur 1.42B
Verbind de voedingskabel van de
perimeterschakelaar aan het
p
erimeterschakelaarbord
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RM510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RM510 in the language / languages: Dutch as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RM510

Robomow RM510 User Manual - English - 60 pages

Robomow RM510 User Manual - German - 60 pages

Robomow RM510 User Manual - French - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info