512474
11
Zoom out
Zoom in
Previous page
1/44
Next page
11
Another option is to mount the Perimeter Switch onto a
vertical surface, such as a wall or deck railing. There are
three small bosses on the back of the switch cover in
order to mount it this way. (Figure 1.4).
1.2.3 Multiple Zones/Areas And Narrow Passages
Your home may require more than one zone to be set up in
order for the Robomow to work in all of your lawn effectively.
Where grass areas are not contiguous, or are separated by
fences, sidewalks or other objects, it is required to make each
of these a separate zone.
When setting separated zones there are two options to lay the
wire:
Option A
: All zones are looped together and connected to the
Perimeter Switch. Perimeter wire can be as long as 500
meters (1650ft) in one loop when connected to the Perimeter
Switch (Figure 1.5).
Option B
: There are separated zones. The Perimeter Switch can be moved between different
zones (Figure 1.6).
To mow other areas, simply drive or carry Robomow to the area you want to mow and operate it. In
this way, if one zone needs a shorter operating time than another, it can easily be set (Chapter
2.1.1). When this area is completed, drive the mower back for re-charging.
Determining the distance between adjacent perimeter wires:
1. If lawns are installed by the same perimeter wire that is connected to the same
source (Base Station / Perimeter Switch), then it is enough to keep a distance of one
meter between the wires to prevent interference in operation.
2. If lawns are installed using different perimeter wires that are not connected, and
each has its own source (Base Station / Perimeter Switch), then one of the following
is required:
a. Maintain a minimum distance between the wires (30-50cm) to allow overlap
between mowing zones, but synchronize between the mowing schedules to
confirm there will not be interference between the zones. OR
b. Keep two meters between the perimeter wires with no need to synchronize
between the operation schedules.
Figure 1.5 (Option A)
Two zones are looped
together and connected
to the Perimeter Switch
Distance between wires
greater than 1 meter (3ft.)
Wires leading to the next plot
are parallel and touching. The
gap between them is for
illustration only.
Zone A
Zone B
Zone A
Perimeter
Switch
Figure 1.4 - Squeeze the tabs on
both sides to remove cover
Mounting the Perimeter Switch using
three mounting bosses on back cover
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RM200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RM200 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RM200

Robomow RM200 User Manual - German - 44 pages

Robomow RM200 User Manual - Dutch - 44 pages

Robomow RM200 User Manual - French - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info