512470
26
Zoom out
Zoom in
Previous page
1/84
Next page
Chapter 2-10
Robomow RL555, RL855, RL2000
P Create a “narrow pass” of wires, leading from the external Base
Station to the lawn and back.
The beginning (going) and the end (coming) sections of the Perimeter
Wire create this pass.
2.7 Testing Base Station Setup
P Fasten the Base Station in place: Use a hammer to drive the 5 stakes
in. start by placing the 2 rear stakes only part way into the ground.
Later, after testing for charging, some small adjustments may be needed.
Then, you will hammer the 5 stakes all the way down.
P Test as follows both Internal and External Base Station setups:
) Connect the extension cord (15 m low voltage cable) to the
Power Supply plug.
) Connect the Power Supply to a regular household
receptacle 230/120 Volts AC.
c IMPORTANT c The power supply is suitable for indoor use only. It
should be fixed to the wall, in a sheltered, dry, well ventilated spot.
It should NOT be exposed to direct sunlight or rain.
A small flashing green light next to the ‘ON’ button indicates the system is
on and functioning correctly.
The control panel has other indicators: a charging indicator and a
“disconnected/broken Perimeter Wire” indicator.
The Base Station Board has an automatic shutoff feature, eliminating the
need to turn it off after each use. It will shut itself off once the mower re-
docks at the end of the operation.
2.8 Setup in Non-Base Zones
A non-base zone is a lawn or an area of a lawn, that is
NOT connected to a Base Station.
A Perimeter Switch should be installed in these areas.
A Perimeter Switch is supplied with RL555/RL855
Robomows and is an optional accessory for RL2000.
When necessary, Perimeter Switch can be easily moved
to other zones.




































Indoor Power
Supply
Wires leading from
the perimeter to the
Perimeter Switch are
adjacent and touching.
The Perimeter Switch MUST be
Mounted vertically in order to
maintain its’ water resistance
Indoor Use Only
Zone A
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RL serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RL serie in the language / languages: English as an attachment in your email.

The manual is 19,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RL serie

Robomow RL serie User Manual - German - 84 pages

Robomow RL serie User Manual - Dutch - 84 pages

Robomow RL serie User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info