512470
17
Zoom out
Zoom in
Previous page
1/84
Next page
Chapter 2-1
Base Station and Perimeter Wire Setup
Chapter 2 Base Station and Perimeter Wire Setup
Recommendation, before you start:
During setup, you will insert pegs into the ground. To make this task
smoother, we recommend you mow your lawn and water it before starting.
Getting Ready
Confirm all parts needed for setup are within reach (refer to ‘What’s in the
Box, Introduction).
In addition, you will use the following tools:
2.1 Perimeter Wire Setup
Before you start the setup, you should have a plan for the Perimeter Wire
layout and for the location of the Base Station
















.
Laying the Perimeter Wire for the Internal setting of the Base Station is
different from the External setting.
2.1.1 Starting Point: Perimeter Wire at the Base Station area.
P
















Place the Base Station, according to your plan, with its fence
facing the inner lawn area.
Pull the plot connector and the wire connected to it out of the plastic
covering.
Do NOT remove the wire spool from its covering.
The plastic covering is the dispenser
for the wire.
P If setting of Base Station is Internal (inside lawn)
) Peg the beginning of the wire to the ground, where
Base Station will be located.
) Pull out 30 cm (12 inches) of wire and leave it loose at
the Base Station location.
Later, at the end of the setup this part of the wire will
close the Perimeter Wire loop.
) Start laying the wire in a counter-clockwise direction.
) Continue to pull the Perimeter Wire out of its covering,
laying it loosely as you walk along the lawn edge.
















Hammer
Combination Pliers
Small flat and Philips
screwdrivers
Counter-clockwise
direction of wire layout
Perimeter Wire – do not remove
the plastic covering
Leave 30 cm
(12 inches)
starting point
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robomow RL serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robomow RL serie in the language / languages: English as an attachment in your email.

The manual is 19,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robomow RL serie

Robomow RL serie User Manual - German - 84 pages

Robomow RL serie User Manual - Dutch - 84 pages

Robomow RL serie User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info